You have no items in your shopping cart.

S-Shanks

Filters
per page
11450959
New OptiFlex series tine. Similar to our WST3212 s-tine other than it has extra material in the area of the tine wear breakage most often occurs reducing the need for a helper tine.Manufactured using new high tech production technology.Sold with a 1 1/2" reversible spike mounted to the shank. Mounting hole is 1/2"Shovel mounting hole is for a 3/8" bolt.
$47.42
11460911
Standard S tine. Ground clearance is 14.25", accepts 3/8" shovel bolt. Shank is 1.25" wide at the mounting clamp, 1/2" thick.
$32.23
11447789
High clearance S tine. Ground clearance is 19.75", accepts 3/8" shovel bolt. Shank is 1.75" wide at the mounting clamp, 1/2" thick.
$36.08
11461107
High clearance s-tine for danish shovels; mounts to a 2", 2-1/2" or 3" square tube.S-tine to fi t JD 940 & 960 with danish style shanks, also fits JD 856 row crop cultivator. Shank is 1 1/4" wide.
$47.76
11454547
Standard S tine. Ground clearance is 17.25", accepts 3/8" shovel bolt. Shank is 1.25" wide at the mounting clamp, 7/16" thick.
$37.71
11451073
Standard S tine to fit JD 980 and 2210, 2230 field cultivators. Ground clearance is 21-1/2".
$60.43
11445192
12" long down pressure spring for use with bolt-on shank. Fits John Deere field cultivators 980, 985; 2200, 2210 with 150 lb. trip; 726 mulch finisher; 730 air drill. Spring has 2-1/4" I.D.
$25.72
11454748
Kongskilde VTH upper tine for Vibro Till.65 mm (2.6") wide.13.3 mm thick (1/2" approx)
$121.65
11449794
Short Rau Tine with point. Ground clearance is 9", 1" wide, overall height 12", 5/16" thick.
$20.53
11462403
Standard S tine for danish shovels; mounts to a 2" square tube. Ground clearance is 14.5", accepts 3/8" shovel bolt. Shank is 1.25" wide at the mounting clamp, 3/8" thick.Overall Height is 21".Case-IH 133, 183 row crop cultivators.John Deere RM, FM, 75, 85, 725, 815, 825, 845 row crop cultivators.
$20.74
11444381
Replacement S-Tine to fit Kongskilde. Shank is 2" wide and .4" thick. Ground clearance is 17.6". Has two bolt holes for sweep mounting.
$41.20
11453950
Tine to fit Remlinger Chisel Plow levelers, Clamp part number is J00008, sold seperately.Shank is 1 3/4" wide at the top. Overall length is 25 1/2". Ground clearance is 17 1/2".
$60.93
11450062
This universal shank has a ground clearance of approximately 22". The shank is 1.75" wide and 9/16" thick. It is shaped like an s tine but uses a traditional field cultivator sweep like a c shank would use.Made in the USA.
$131.68