Below find Larsen LED light kits that work for Challenger / Fendt brand equipment, this includes Challenger, Lexion, and Fendt. Most kits are "plug and play" except for the adapter cables that are always shipped with one connector not installed, this is so you can make sure the polarity is correct when connecting the lights to the OEM harness. For some kits, you will have to install the supplied connectors on the OEM wires or splice the connections, this is explained in the kit description.
LED light kit for the Challenger 65D, 65E, 75D, 75E, 85 & 95 C,D,E series tractors. Please select bulb type for headlights below. (880 series, H11 or SP11 please check your tractor)
LED light kit for the Challenger 700 - 800 series.
Includes 6 Oval LED-765 lights, and is for tractors with 2 rear cab factory HID lights. We then leave the HID lights and replace the 4 halogen lights. 2 extra lights can be added if your tractor does not have the factory HID lights.
LED light kit for the Challenger 700 - 800 series.
Includes 6 Oval LED-765 lights, and is for tractors with 2 rear cab factory HID lights. We then leave the HID lights and replace the 4 halogen lights. 2 extra lights can be added if your tractor does not have the factory HID lights.
Larsen LED kit for CAT Lexion 500 series using Thomas LED lights. This kit will replace the 2 large top cab lights, the 4 front facing mirror bracket lights, the 2 side lights on the mirror bracket, and the unload auger light with the HP-4. Add more lights if needed. Note that some of the lights might be HID from the factory, we do not recommend replacing those, please call us if changes are needed. Wiring required - you will have to use included connectors.
Larsen LED kit for CAT Lexion 600 & 700 series using LED-4405 lights. This kit will replace the 4 front facing mirror bracket lights, the 2 side lights on the mirror bracket, unload auger light with the LED-4405, and the 2 lower cab high beam lights with the Thomas EHP-1. Add more lights if needed. Note that some of the lights might be HID from the factory, we do not recommend replacing those, please call us if changes are needed.
Larsen LED kit for CAT Lexion 600 & 700 series using Thomas LED lights. This kit will replace the 4 front facing mirror bracket lights, the 2 side lights on the mirror bracket, unload auger light with the RHP-4, and the 2 lower cab high beam lights with the EHP-1. Add more lights if needed. Note that some of the lights might be HID from the factory, we do not recommend replacing those, please call us if changes are needed.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
LED-4013 Hi-Lo or as flood using the included adapter wire. Claas Combine Light. Will also fit some Massey Ferguson tractors with high visibility cabs and John Deere Forage Harvesters. Replaces OEM Part Numbers: AZ41570, 3713134M91
Headlight for some Agco tractors using 3 bolts to hold the light. Spacing between the 2 mounting holes is 5". Please verify your tractor use the 3 hole system before ordering.
EHP-1 is a 3" LED light. 40 degree light beam, 2800 lumen effective ! Much brighter light than OEM LED lights ! Narrow flood 40° - better distance than the 60° flood. AGCO PN # 72438177
HP-4 is a 4" LED light made for use on most tractors where a square light is needed. 40 degree light beam, 4366 lumen effective ! Much brighter light than OEM LED lights ! Narrow flood - more distance than the 60° flood. Find brackets and adapter cables on the bottom of the page.
HP-4 is a 4" LED light made for use on most tractors where a square light is needed. 60 degree light beam, 4366 lumens effective! Much brighter light than OEM LED lights! Find brackets and adapter cables on the bottom of the page.
The RHP-4 is a 4" Round LED light made for use on most tractors where a round light is needed. 40 degree light beam, 4366 lumens effective! Much brighter light than OEM LED lights! Narrow flood - more distance than the 60° flood. Find brackets and adapter cables on the bottom of the page.
The RHP-4 is a 4" Round LED light made for use on most tractors where a round light is needed. 60 degree light beam, 4366 lumens effective! Much brighter light than OEM LED lights! Find brackets and adapter cables on the bottom of the page.
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. This 15" adapter is needed if you are replacing OEM HID Xenon lights on the fenders of JD tractors where the ballast is inside the fender.
LED-486, Round stud mounted warning light for mounting onto fenders and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash. Also - most older flash relays will not work with this low wattage turn signal, you will need SKU LL0466 for the turn signal to work.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.