You have no items in your shopping cart.

Show All Products

Filters
per page
11978131
$1,708.93
11462505
$50.61
11453550
$3,182.37
11449363
$11.65
11460422
$11.65
11448671
$3,867.02
11454230
$3,445.79
11448076
Complete Gold 'n Cut Kit to fit AGCO-Allis (Gleaner) Series 3-8 Also Massey 9850 Flex. Comes with Guards, Sickle, Spring Loaded hold downs, bolts, and all required shims and wear plates.** Does NOT include the sickle drive head.
$2,180.74
11454843
Complete Gold 'n Cut Kit to fit AGCO-Allis (Gleaner) Series 3-8 Also Massey 9850 Flex. Comes with Guards, Sickle, Spring Loaded hold downs, bolts, and all required shims and wear plates.** Does NOT include the sickle drive head.
$2,066.64
11443490
Complete Gold 'n Cut Kit to fit AGCO-Allis (Gleaner) Series 3-8 Also Massey 9850 Flex. Comes with Guards, Sickle, Spring Loaded hold downs, bolts, and all required shims and wear plates.** Does NOT include the sickle drive head.
$2,396.29
11452349
Complete Gold 'n Cut Kit to fit AGCO-Allis (Gleaner) Series 3-8 Also Massey 9850 Flex. Comes with Guards, Sickle, Spring Loaded hold downs, bolts, and all required shims and wear plates.** Does NOT include the sickle drive head.
$2,573.79
11449769
Complete Gold 'n Cut Kit to fit AGCO-Allis (Gleaner) Series 3-8 Also Massey 9850 Flex. Comes with Guards, Sickle, Spring Loaded hold downs, bolts, and all required shims and wear plates.** Does NOT include the sickle drive head.
$2,246.96
11452755
Complete Gold 'n Cut Kit to fit AGCO-Allis (Gleaner) Series 3-8 Also Massey 9850 Flex. Comes with Guards, Sickle, Spring Loaded hold downs, bolts, and all required shims and wear plates.** Does NOT include the sickle drive head.
$2,434.18
11455841
Complete Gold 'n Cut Kit to fit AGCO-Allis (Gleaner) Series 3-8 Also Massey 9850 Flex. Comes with Guards, Sickle, Spring Loaded hold downs, bolts, and all required shims and wear plates.** Does NOT include the sickle drive head.
$3,867.02
11448368
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,244.14
11452852
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,979.51
11446686
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,431.71
11447663
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$1,933.51
11442165
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$1,831.53
11449358
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$1,779.81
11447174
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$1,914.33
11456418
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips. **Does NOT include a new sickle drivehead.
$3,182.37
11442275
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips. **Does NOT include a new sickle drivehead.
$3,867.02
11452145
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips. **Does NOT include a new sickle drivehead.
$2,180.74
11460604
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips. **Does NOT include a new sickle drivehead.
$2,345.57
11448665
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips. **Does NOT include a new sickle drivehead.
$2,573.79
11454944
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,193.43
11453234
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,396.29
11461212
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips. **Does NOT include a new sickle drivehead.
$2,400.69
11443671
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$3,182.37
11458908
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,573.79
11446087
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$3,867.02
11450664
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,307.53
11449165
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$3,131.66
11422824
Out in the field where you need hard nosed, plug resistant guards that get the job done, Crary's exclusive full point/mini point design actually doubles the number of cutting surfaces for twice the cutting action in every sickle stroke. They also reduce plant side movement in half keeping shelling and shatter loss to the absolute minimum.Gold 'n Cut single point section. Replaces Crary number 17203.Sold by the piece in boxes of 10 only.
$4.34
11454435
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,180.74
11446283
Gold 'n Cut kit, includes guards, sickle, wear plates (if required), new hardware, and spring loaded holddown clips.**Does NOT include a new sickle drivehead.
$2,890.76
11443391
$11.23
11460418
1 lbs container of planter graphite. Sold by the bottle. There are 24 pcs in a case.
$6.56
11455733
40# box of EZ slide Graphite.
$102.35
11457924
5 pound jug of planter graphite.
$18.19
11449790
$50.61
11443585
$11.65
11457308
Grease seal, replaces CR14970. Replaces JD no. B13294.
$4.04
11457708
Seal for residue managers.
$6.56
11445294
Grease seal, replaces CR14971.Shaft Diameter: 1.497 INSeal Outside Diameter: 2.356 INWidth: 0.433 IN
$3.20
11452646
Guard, 2 prong with crossbar.
$14.05
11436787
Guard, 2 prong without crossbar. Fits Lexion F20, F25, F30, F525, F530, F535; F540 to s/n 44100862.
$17.76
11451160
Guard, Long-Short-LongUsed on models:620F, 625F, 630F, 635F630FD, 635FD, 640FD, 645FD730FD, 735FD, 740FD, 745FD** Double Heat treated guard **
$16.46
11454324
Guard, Short-Long-ShortUsed on models:620F, 625F, 630F, 635F630FD, 635FD, 640FD, 645FD730FD, 735FD, 740FD, 745FD** Double Heat treated guard **
$16.46
11449346
Poly guide for steel finger.
$2.36
11449350
Double prong guard. Fits New Holland mowers. Fits Rowse mowers.
$12.84
11452258
Head areaguard for Hart CarterGen II with Crary Gold 'n Cut. Replaces Crary number 22064.
$43.25
11456723
Complete Gauge Wheel Assembly, 4.5" x 16" for Kinze planters built 1993 and later. Steel/Steel rims with bearing. With Nylon outer cover.
$165.97
11457723
Half Section, C-IH LH. (packed 10 per carton)
$13.62
11442273
Big tooth half section, LH for use under the drive head. Replaces Crary number 21553.
$12.40
11347569
Right hand big tooth section for use on the right hand end of the sickle.
$8.05
11450389
3 7/8" half spool for JD discs with 7 1/4" spacing. .
$19.84
11449454
Hanging bracket for Alloway, Brady. Replaces Alloway 505.3.0014.
$7.99
11447377
Hardware kit for push/pull scrapers.
$9.45
11443892
Hardware kit with braces. This kit is included with a complete scraper kit. Includes all hardware and 2 braces for CFC manufactured barn scrapers or snow shovels.
$8.92
11451360
3/4" square harrow spike with head, 14.75" long.
$6.13
11454829
3/4" square harrow spike with head, 11" long. Made in the USAUniveral tooth used on many spike tooth harrows including the following:AGCO Field cultivators 5035, 5055, 5135. Land Finishers 6221, 6333, 6433.Case-IH and DMI Tiger-Mate, Tiger-Mate II.Challenger Field cultivators 5035, 5055, 5056, 5135. Land Finishers 6221, 6333, 6433.Great Plains standard harrow.John Deere 722, 724, 726 mulch finishers and 960, 980, 985, 2200, 2210 field cultivators.Farmhand-Glencoe Yield Builder disc ripper.Krause field cultivators.Landoll 875, 876 Tilloll; 850, 855 Finisholl; 9800 field cultivator.Massey Ferguson Field cultivators 5035, 5055, 5056, 5135. Land Finishers 6221, 6333, 6433.McFarlane RD4000, RD4100.New Holland ST250 field cultivators.Remlinger standard harrows with 2-1/2" x 2-1/2" x 1/4" angle iron bars.Sunflower 5033, 5034, 5035, 5054, 5055, 5056, 5135, 5232, 5332 field cultivators; 6000 6220, 6221, 6332, 6333, 6432, 6433 Land Finishers.
$4.61
11440069
Harrow tooth for Case-IH, Great Plains, John Deere, Tye drills.Ours has an 11" leg for longer wear. For use on 1.5" diameter tubing.
$5.15
11452850
Made from 1/4" thick, white, virgin UHMW. Price does notinclude hardware.
$36.44
11460106
Made from 1/4" thick, white, virgin UHMW. Price does not include hardware.
$20.99
11401059
Made from 1/4" thick, white, virgin UHMW. Price does not include hardware.
$36.44
11452751
Made from 1/4" thick, white, virgin UHMW. Price does not include hardware.
$47.58
11446467
Made from 1/4" thick, white, virgin UHMW. Price does notinclude hardware.
$16.80
11441054
Hub and Disc Assembly to convert Yetter marker assemblies to the HD assembly. Comes with 16" notched blade, hubs, brackets and hardware.
$556.97
11453632
Head area guard on models 820 and 1020 with Crary cutting systems using 7228 double point guards. 3 used per head.
$39.32
11452949
Double prong guard used at drive head area on models 820, 1010, 1020 platforms, 3 used. 2010, 2020 PIN CBJ020001 & up platforms, 4 used.New Holland models 72C, 74C PIN PNL017001 & up platforms (drive head guard, 2 used).** Double Heat treated guard **
$17.16
11460911
Standard S tine. Ground clearance is 14.25", accepts 3/8" shovel bolt. Shank is 1.25" wide at the mounting clamp, 1/2" thick.
$32.23
11462304
Hebicide/Insecticide drive chain for JD 7000, Kinze also JD Max Emerge 2 with Finger Pickup Seed Meter. Also Seed meter drive chain on White 6000 series.#41 chain x 110 links.
$16.69
11969493
Insecticide/herbicide chain for John Deere planters ME2 1992 & after, Plus, XP with vacuum seed meter.
$19.16
11972259
Seed meter drive for Kinze® with pull units set back 4" and finger pickup or brush meters; insecticide/herbicide drive for Kinze® 1983 & after with finger pickup or brush meters.
$14.49
11449052
$21.42
11436798
Hex step bushing for 1993 and later Kinze© closing wheel arms. 2 used per row.
$3.73
11436570
Hi-arch guard clip used with BU250 guard. Fits Case-IH, Gehl, Hesston, Macdon, New Holland mower conditioners and windrowers.
$6.02
11447789
High clearance S tine. Ground clearance is 19.75", accepts 3/8" shovel bolt. Shank is 1.75" wide at the mounting clamp, 1/2" thick.
$36.08
11461107
High clearance s-tine for danish shovels; mounts to a 2", 2-1/2" or 3" square tube.S-tine to fi t JD 940 & 960 with danish style shanks, also fits JD 856 row crop cultivator. Shank is 1 1/4" wide.
$47.76
11457728
High Performance replacement point for Orthman 1tRIPr strip till machine. Sold with attaching pins. Also used on Sunflower 7610 & 7630 strip till machines with the 19313PS point option.The design of the foot will reduce sidewall compaction and nearly eliminate "gully washers" right down to the strip-tilled row in case of heavy rains within a week or two of the strip till pass.
$119.50
11450251
50 pcs of hitchpin clips.
$5.62
11347580
Hitch Pin, 1 1/4" x 16", extra long for the hard to reach applications.
$35.66
11443574
Hitch pin, 1 1/4" diameter x 8" long with keeper pin.
$18.69
11459113
Hitchpin, 1 1/8" diameterx 7" long with keeper pin.
$16.52
11450382
Red handled hitch pin. Heat treated. Includes clip.
$10.70
11456931
Hitch pin, 1/2" diameter by 4" long. Has a red handle.
$4.83
11446684
Red handled hitch pin. Heat treated. Includes clip.
$8.04
11454640
Red handled hitch pin. Heat treated. Includes clip.
$8.27
11438497
Hitch pin with clip. 1 1/2" diameter, 8" long.
$24.09
11454442
Stamped steel hold down clip, fits all flex heads and early rigid heads. For use with riveted or bolted sickles.Also fits John Deere mowers and haybines.
$9.32
11423300
Adjustable hold down clip for 600 series.
$8.39
11456330
Universal Extra High arch hold down clip for use at the drive head area. Fits all flex heads, early rigid heads, mowers and haybines.
$9.85
11449160
Tie plate, high arch, used with BT260.
$8.90
11330686
Tie plate, low arch, used with BT260.
$6.84
11441991
Head area hold down for HCC floating sickle bars. Not spring loaded or adjustable.
$53.77
11453638
Cast hold down clip for riveted or bolted sickles used on HCC and Love systems.
$15.53
11443491
Hold down clip. FitsNew Holland combine models 970, 971, 972, 973, 71C, and 73C series. Also used on many haybines and sickle bar mowers. Can be used with riveted or bolted sections.
$6.70
11449775
Spring Loaded hold down used on CIH 820, NH Flex heads, JD 200, 600, & 900 series cutterbars. This hold down is used in the head area of the cutterbar.
$30.36