Search
You have no items in your shopping cart.
Show All Products
11970754
Repair part, 38 5/8” x 14” used on 500 and 800 series only.
$48.37
11450256
Made from 1/4" thick, white, virgin UHMW. Price does not include hardware.
$80.39
11456628
Made from 1/4" thick, white, virgin UHMW. Price does notinclude hardware. Dimmensions are approximately 11" x 24"
$47.64
11445302
Made from 1/4" thick, white, virgin UHMW. Price does notinclude hardware.
$10.74
11452150
Press wheel spring,Left hand used on models 1560, 1860, 1690, 1890, 1895, 1590, 1990. Replaces JD no. N282219.
$10.74
11461110
Press wheel spring, right hand used on models 1560, 1860, 1690, 1890, 1895, 1590, 1990. Replaces JD no. N282218.
$10.74
11447095
Complete push/pull scraper with handle, blade, and hardware.
$42.41
11454733
Poly seed strap for 2 pc 1560, 1860 seed boot. Replaces JD no. N282843.
$2.68
11454627
Poly seed strap, UHMW polymer, fits seed boots. Used on 750, 1590, 1690, 1850, 1890, 1895, 1990. Replaces JD no. N219982.
$2.06
11456041
Reversible Point 1" x .2" x 5.5". Used with WST470 tine only. Uses an 8 mm danish bolt. (5/16" diameter)
$4.31
11450270
18" Rear covering disc. - 4 bolt.Fits DMI Turbo-Tiger, Tiger-Two, Turbo-TigerII, 527, 527B, 530, 530B, 530C, 730, 730B, 730C, 870, 875, 2500, 6700, 6750, 9300, ST650, ST720, ST770, ST775. Also Bermbuild'r on 2500 and ST650. Case-IH and DMI spring loaded NH3 disc sealers.
$38.22
11449168
Rear Herbicide-Insecticide drive chain. #41 x 162 links. 800/900 series.
$15.54
11446190
Replaceable nylon wear pads offer 3-4 times the life to the hold downs.This rear wear pad is used on hold down numbers 25615 and 24337.
$3.41
11458621
Rear wear pad for adjustable holddown clipsfor use on Crary hold down part numbers 24335, 24344, 25454, 24911, 25348. This part replaces Crary part number 12165.
$3.41
11969181
Rear Wear Pad. (L shape) (24336, 24338, 25724)
$3.41
11452655
Long wear pad for Metric plows. Sold 6 per carton with hardware. Made in the USA.
$42.36
11447089
Rebuild kit for3 section reels. Includes all bearings, hardware, and 50 replacement fingers for "See Thru" pipe reels. These heads are usually 15' and longer.
$258.24
11452263
Bearing for reel arm, poly. Comes with both halves to make one complete bearing. Fits reels with tear drop bats that have plastic fingers mounted to rear of steel bat. Gleaner Series 3, 300; Case-IH 1010, 1020; MF 9700, 9750. Used as reel shield bearing on Gleaner 7200, 8200; JD 900 s/n 645301 & up, 600D, 600F, 600FD, 600R; MF early 9700, 9750.
$4.36
11444291
Reel Arm used on most OEM pipe reels. AGCO Gleaner 300, 400, 500, 700, 800, 7000, 7200, 8000, 8200; Case-IH 1010, 1020, 2010, 2020;Lexion F with HCC reel; JD 900 s/n 645300 & above, 600F, 600R; MF 9700, 9750, 9800, 9850; NH 971, 973, 71C, 72C, 73C, 74C.
$17.16
11459615
Reel Arm with tear drop bats that have the poly tine mounted to the rear of the bat. Used on Gleaner Series 3 and 300; Case-IH 1010 and 1020; MF 9700 and 9750.
$20.68
11440335
Steel arm. Fits reels with wood bats: AGCO Gleaner; JD Quik-Tatch, 200; Case-IH 810, 820; NH 960, 970, 972; White Heavy Duty. Fits reels with tear drop bats: JD 900 prior to s/n 645300; NH971, 973.
$15.54
11458818
This Gentile Finger™ is designed for use with new wood bats or bats that have never had a steel finger mounted to them. Comes complete with a bolt and nut for easy installation. **Sold 50 per box only.**
$1.59
11441057
Replacement reel tine for CFC manufactured "See Thru" pipe reel. Does not fit other applications. This tine features the patented "Gentle Finger" design. Sold by the piece in packs of 10 only.*Does not include hardware.Overall length is 9.25"Length from center of hole to the tip is 8 5/8"
$1.88
11452250
Made of Super tough nylon for extra strength. Fits tear drop bats on Case-IH combines 820 (all) and 1020 (built 1987 and before).Screw mounts to the front of the steel bat; hardware included.
$1.86
11450832
Poly reel finger for metal Tear drop bats. Screw is included and screws in from the back side of the reel bat.This is for OEM reels manufactured by HCC. Used on John Deere, Case-IH, Agco, New Holland, and others.AGCO-Gleaner 300;Case-IH 1020 1988 & after;John Deere 900;Massey Ferguson 9700, 9750;New Holland 971, 973** Sold in increments of 50 only.
$1.64
11442276
Nylon pipe reel tine, double wing. For pipe reels with 4.5" tine spacing.AGCO-Gleaner 300, 400, 500, 700, 800;Case-IH 1010, 1020 (to 2001);Claas Lexion F (HCC Level I reel);Honey Bee (early);John Deere 900 to s/n 685100;Massey Ferguson 9700, 9750;New Holland 971, 973, 92C, 994, 994D.To order a pack of 180 please order part number K153175.
$2.07
11450160
Nylon pipe reel tine, double wing. For pipe reels with 6" tine spacing. AGCO-Gleaner 700, 800, 7000, 7200, 8000, 8200, 9250;Case-IH 1010, 1020 (2001 & up); 2010, 2020, 3020;CAT F;Challenger;Claas Lexion F (HCC Level II reel);Honey Bee late;John Deere 900D, 900F, 900R s/n 685101 & up; 600F, 600R; 600D, 600FD to s/n 785000;Massey Ferguson 8000, 8200, 9250, 9800, 9850;New Holland 71C, 72C, 73C, 74C, 92C, 94C, 740CF.to order a package of 130 pcs, order part number K153176.
$3.20
11451754
Connecting link for 550 chain. Often used on Gathering Chains and Feeder House Chains.
$6.41
11460311
Replacement 18 V battery for LG1800 battery operated grease gun.
$0.00
11449788
Repair part, 38 5/8" x 14". Made from virgin UHMW, 1/4" thick.
$58.81
11443384
Replacement bearing for gathering chain idler sprocket. Used in our part number A032012GH.
$9.65
11440070
Replacement hub for Yetter coulter assemblies. Used on many Yetter models including 2995, 2996, 2960, 2999.
$60.85
11452843
Sold with Shark Tooth Wheels, floater wheels are included.Made by Yetter Manufacturing, www.yetterco.comUnit mounted coulter assembly sold seperately.Face Plate Mount Floating Residue Manager. Fits Yetter 6000, JD 7000,7200, Kinze 2000, 3000, White 6100, 8000.
$752.95
11448860
Heavy Duty Quick Change retainer spring for Nichols style noc-ons.
$3.73
11459815
Return grain elevator chain with paddles for C-IH models 1420, 1440, 1460, 1480, 1620, 1640, 1660, 1680, 1644, 1666, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588.
$251.94
11462803
Return grain elevator chain with paddles for JD models 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9600, 9610, 9650, 9650CTS, 9660, 9660CTS, CTS, CTSII.
$329.00
11973062
Return grain elevator chain with rubber paddles for JD models 9560STS, 9570STS, 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9770STS, 9860STS, 9870STS, S550, S650, S660, S670. Replaces JD number AH148021.
$263.00
11449364
Repair blades to fit Hiniker, Kinze, Buffalo, Krause, Sukup and others. Produced out of 5/16" thick x 3-1/2" wide. Double bevel, reversible. Sold each, without hardware.
$30.13
11447292
Repair blades to fit Hiniker, Kinze, Buffalo, Krause, Sukup and others. Produced out of 5/16" thick x 3-1/2" wide. Double bevel, reversible. Sold each, without hardware.
$35.85
11452957
Repair blades to fit Hiniker, Kinze, Buffalo, Krause, Sukup and others. Produced out of 5/16" thick x 3-1/2" wide. Double bevel, reversible. Sold each, without hardware.
$39.13
11445879
Double point shovel, drop forged for better wearability with self sharpening edges for good soil penetration. 3/8" thick, 2" wide, and 11-3/4" long. Made to fit 1-3/4" & 2" bolt spacings. Each hole is slightly longated to accomodate the different holes spacing. Replaces Wiese part number DP2237 and DP2276.
$18.06
11442484
Repair blades to fit Hiniker, Kinze, Buffalo, Krause, Sukup and others. Produced out of 5/16" thick x 3-1/2" wide. Double bevel, reversible. Sold each, without hardware.
$27.27
11453852
Repair blades to fit Hiniker, Kinze, Buffalo, Krause, Sukup and others. Produced out of 5/16" thick x 3-1/2" wide. Double bevel, reversible. Sold each, without hardware.
$32.06
11445481
Deckplate, RH with hardfaced straight edge. Fits John Deere 600 cornhead to s/n 745100.
$59.92
11444589
Right hand gauge wheel arm with (2) bushings, (2) seals, grease fitting. Fits Kinze® 3000, 4000 series planters. Replaces Kinze numbers GA7976, GA21676
$42.00
11459422
RH Knife assembly for JD 630FD with Double drive. RH 15' assembly only.
$443.43
11461904
Deckplate, RH with beveled edge. Fits John Deere 600 cornhead to s/n 745100.
$37.20
11455243
RH Knife assembly for JD 635FD with Double drive. RH 17.5' assembly only.
$689.36
11460709
RH Knife assembly for JD 640FD with Double drive. RH 20' assembly only.
$715.92
11447787
Conservation Ripper Point with 7" wings.Case-IH disc rippers 527B, 690, 870, 875, MRX690; 2500 with curved parabolic or MRD shanks; 6750 parabolic.Front shanks only on 530B, 530C, 730B, 730C, 9300.DMI disc rippers500, 527, 527B, 900, 1000, 1300; 2500 with curved parabolic or MRD shanks.Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300.Glencoe coulter chiselCC4450 with Deep Till shanks.New Holland disc rippersST720, ST740; ST650 with curved parabolic or MRD shanks.Front shanks only on ST770, ST775.Salford disc rippers9705, 9707, 9709, 9711, 9713, 9715, 9805, 9807, 9809, 9811, 9813 with curved parabolic shank.Sunflower disc rippers4610, 4630. Mount with RP12212 roll pin, order separately.White conservation chisel plows435, 445 with Deep Till shank.
$269.23
11443000
Shin (shank protector) for curved shank with shear bolt or standard spring reset. Chrome-nickel alloy. Used on disk, mulch, v-rippers 512,913, 915, 955, 2700. Requires 2 mounting holes on 11-1/4” centers,replaces JD no. N261140
$86.07
11447996
Made from 1/4" thick, yellow, virgin UHMW. Dimensions: 16 5/8" x 50"
$123.18
11442896
Made from 1/4" thick, yellow, virgin UHMW. Dimensions: 4" x 11"
$18.90
11452956
Shin (shank protector) for JD rippers with straight shanks, replaces JD no. N261005. Made from Chrome/Nickel material for longer wear. Used on models 2100, 2700, 915V, 913, and 955 row crop ripper. Hole spacing is 11” center to center.
$73.92
11450057
Riveted flange bearing commonly used on "To the Max" harrows and McFarlane Reel discs RD4000 serial number 12947 and up.
$50.90
11443300
Rivets for planter fertilizer openers, pkg of 50. 1/4" x 1 1/2".
$0.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0025
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.
$26.00
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$27.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$8.00
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$76.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$31.45
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$33.00
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$35.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$26.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$34.00
LL0574
LED 2 x 5 LED light for the top front cab on the 55 & 60 series + 6000-7000-8000 series tractor. Flood beam.
$34.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$100.00
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$219.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$64.00
