Search
You have no items in your shopping cart.
Show All Products
11453239
9" sweep to fit field cultivators and soil finishers. This sweep is 1/4" thick and has 2 bolt holes on 1.75" center to center spacing. The 41 degree stem angle is compatable with John Deere 1000 series field cultivatorand model 722 soil finisher.
$12.86
11451766
9" Disc Spool for 1 1/8" square, fits models 210, 215, 220, 230, 235, 621, 627, 630 and 637 discs with 9" spacing; 710, 712, and 714 mulch tillers.
$32.07
11443586
Heat treated, solid steel moldboard fits AC 387 series bottoms. 14", 16", and 18".Made by Wiese Corporation in the USA.
$173.90
11458724
Plow shin for AC plows with 387 bottoms. Fits 14", 16", and 18" bottoms. Replaces AC# 347649.Sold in cartons of 6 only.Includes hardware.
$32.01
11452757
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$901.88
11459015
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$1,047.99
11446169
Aluminum spacer block used to space the fertilizer knife. Replaces Yetter no. 2995-309.
$35.41
11453050
Auger floor liner kit for 9400, 9410, 9500, 9510 series.Protect the area in your grain tank that needs it the most and wears out the quickest. Install the CFC Grain Tank Auger Floor liner over new or worn tank floor. Allows for better feeding of the grain and protects the worn out steel.Comes with 1/8" UHMW poly and stainless steel hold down strips.
$436.33
11963800
Auger floor liner kit for 9450, 9550, 9560, 9600, 9610, 9650, 9660.
$415.55
11451256
Augermate, 13 HP, 2100 PSI, 9 gpm, Electric Start, HONDA engine. For Augers with 5.0 thru 7.9 cubic inch displacement hydraulic motor. **Price does not include battery.
$2,707.50
11449263
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$982.90
11446675
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$1,142.30
11449163
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$1,221.99
11448683
Thin, curved, short knife designed for applying in beds. 3/8" x 2" shank size. Comes with 3/8" closed and drilled tube.
$24.36
11457121
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$1,182.15
11446680
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$2,244.14
11454328
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$2,143.38
11440084
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat price includes link welded onto each end.
$640.17
11449352
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat includes link welded onto each end.
$1,977.88
11456622
10" x 48" Complete barn scraper.Shown in picture with the straight steel handle.
$65.56
11447075
Bearing used on mulitiple applications.Yetter: * Residue manager.* 2920 Spring-Loaded NH3 disc sealer hub with 3-1/4" bolt circle.* Spike closing wheel.* Standard marker.Case-IH:* Residue manager, 1200 series planter notched furrower.John Deere:* Row Cleaners.
$23.08
11441055
Used on multiple machines including:John Deere marker blades 7000 and 7100 built 1974 and after; 7200, 7240, 7300 and 7340 built prior to 1990 with smooth blades; 71 Flex 1987 and newer. John Deere furrow opener prior to 1984.Case-IH 900, 950 and 955 series with notched furrow openers (2 per blade).Marliss , M & W, Remlinger, Sukup grain drill disc opener.Landoll 5210, 5211, 5530, 5531 disc opener.Sunflower 9100, 9200, 9300, 9400 disc opener.Kuhn Krause star wheels on Dominator (2 used). Bore: 0.750" O.D.: 2.0472" Width: 0.5906" at Outside race.Width: 1.378" at inner race.
$10.18
11451844
Bearing for clutch actuator shaft. 9/16" hex bore. Fits 7000 flex fold, 7200 & 1750.
$14.96
11452023
Bearing assembly for seed drive line, 7/8" hex bore. Fits 7200 flex fold, 1710, 1760, 1770, 1780, & 1790.
$19.59
11453841
Bearing base (bottom), used on wood bat reels and some tear drop reels.. Also used on Agco, NH, and IH.
$1.33
11453139
Bearing Cap, used to support AP231386 sprocket on 600 series heads prior to s/n 745100.
$5.04
11449850
Bearing cap (top), used on John Deere wood bat reels and some tear drop reels. Also used on Agco, NH, and IH.
$1.06
11450167
Relube bearing for cast trunnion bearing assembly. Fits Case-IH discs 330, 340, 3950, RMX340; True-Tandem ™ 330 Turbo, 335VT.
$98.67
11457805
Bearing used on JD 750 closing wheels. Steel seals, extended inner race on one side.
$5.35
11443571
Bearing for Kinze 4 bolt No-till coulter built 1991-2001, 2 used per row.
$9.60
11445686
Pipe reel bearing to fit HCC OEM pipe reel. (Includes both halves, does NOT fit CFC pipe reel) AGCO-Gleaner 300, 400, 500, 700, 800, 7000, 7200, 8000, 8200, 9250;Case-IH 1010, 1020, 2010, 2020, 3020;Claas Lexion F with HCC reel;John Deere 900 s/n 645301 & up;Massey Ferguson 9250, 9700, 9750, 9800, 9850;New Holland 971, 973, 71C, 72C, 73C, 74C, 740CF.
$3.20
11454225
Replacement bearing only for seed opener assembly. Has 5/8" round hole in center.Fits 15" seed opener discs on Great Plains planters built 1999 and after. Also fits late model 13-1/2" and 15" double disc openers with 5/8" ID and 1" X 12" press wheels on Great Plains grain drills. Also Krause Kuhn late 13-1/2" openers, 1 used.Bore: 0.6299" (16 mm)O.D.: 2.0964" Width: 0.7638"
$7.82
11449344
Bearing for single disc opener. 1 used per hub. Fits John Deere drills 1560, 1565, 1590, 1690, 1835, 1860, 1890, 1895, 1990.
$32.07
11452352
Bearing housing only for the following makes and models.ChallengerVertical tillage 6610, 6630, 6631, 6650 disc gang and reel.KongskildeVertical tillage 9115, 9125, 9132, 9212, 9220, 9223, 9243 disc gang.LandollDiscs 6210, 6211, 6230, 6231, 6250 disc gang and reel.Vertical tillage 7410VT, 7430VT, 7431VT, 7450VT disc gang and reel.Coulter chisels 2110, 2111, 2130, 2131 disc gang.Disc chisels 2210, 2211 disc gang.Disc rippers Weatherproofer I 2410, 2410F, 2410AFG, 2430; Weatherproofer III 2310 disc gang and chopper reel.Massey FergusonVertical tillage 6610, 6630, 6631, 6650 disc gang and reel.SunflowerSoil Conditioner 7211, 7212, 7231, 7232, 7251, 7252 pull type rolling harrow.Discs 1130, 1211, 1212, 1231, 1232, 1233, 1234, 1321, 1331, 1431, 1432, 1433, 1434, 1435, 1436, 1441, 1442, 1443, 1444, 1541, 1543, 1544, 1550, 6630, 6631 disc gangs.Disc rippers 4010, 4110, 4306, 4310, 4311, 4410, 4411, 4412, 4510, 4511, 4530 disc gang.Vertical tillage 6610, 6630, 6631, 6650 disc gang and reel.Coulter chisels 4211, 4212, 4213, 4232, 4233 disc gang.
$36.42
11449560
Bearing insert used with B6006RS bearing on Yetter and Case-IH Residue Manager and John Deere row cleaners. Also on Yetter standard marker blade assemblies.
$12.36
11456518
Bearing kit for single disc opener. Includes 2 bearings, 2 races, 2 seals, 2 retainers for use in John Deere no-till drills.
$26.66
11451262
Bearing kit for Yetter coulter hubs, includes 2 Bearings, 2 races, and 1 seal.
$21.37
11978242
Kit replaces JD no. AA30942. Used with 1 1/4” square axles on models 315, 335, 355, 375, 635; 637 with C spring bearing hangers; 640, 650, 670 discs. Also fits 310, 330, 331, 340, 350, 360 and 370 discs updated to Dura-Flex® bearings and flanges. Fits 510 and 512 Disc Ripper. Also used on Great Plains Turbo® -till with standard duty gang. Kits include greasable bearing, seals, flanges, and bolts.
$55.67
11453732
Kit replaces JD no. AA30941. Used with 1 1/8" square axles on model numbers JD 210, 215, 220, 230, 235, 621, 627, 630, 637 discs; 710, 712, 714 mulch tillers; 722, 724, 726 mulch finishers. JD no. for the bearing only is AA28184.
$51.12
11442284
Closing wheel bearing kit. Fits JD 750 after serial no. 5281 and all 1850. *John Deere recommends that the nut only be tightened to 105 ft/lbs. for this application.Consists of inner and outer bearings, seal and retainer. Late model wheel marked N218791.
$17.84
11438156
Closing wheel bearing kit. Fits JD 750 up to serial no. 5281.*John Deere recommends that the nut only be tightened to 105 ft/lbs. for this application.
$12.70
11347579
Bearing kit for no-till coulter arm on JD 7200 and later planters. Includes (2) tapered bearings, (2) cups, seal, seal retainer, cotter pin.Fits John Deere MaxEmerge®2, MaxEmerge®Plus, Pro, XP, XP Pro; 1530, 1535. John Deere 910, 915 v-rippers and 955 row crop ripper.
$32.01
11452359
Bearing only for BST209134JD kit shown above.Bearing, relube. Import. Fits rolling basket on John Deere field cultivators 980 s/n 5160 & up, 2210; 2310 Mulch Finisher.
$30.54
11453623
Bearing shield (washer) used in the P3090I trunion assembly, 2 required per unit.
$3.20
11453058
Bearing spool, 1 5/8" long for square axles. Fits models 37, 46, 48, 60, 61, 120, 122, 130, 132, 150, 330, 350, 370, 470, 480, 490 discs with 7 1/2" spacing.
$13.39
11450458
Bearing spool, 4" long, round hole. Used on models 132, 350, 370, 470, 475, 480, 485, 490, 496 (with 1 1/8" square axle), 3800, 3850, 3900, 3950, RMX340.
$14.75
11457518
Bearing spool, 3" long, round hole. Used on models 475, 496, 3800, 3850.
$13.80
11969365
Bearing spool, 3” long for square axles. Fits models 37, 46, 48, 60, 61, 76,120, 122, 130, 132, 150, 330, 350, 370, 470, 480, 490, 610, 760 discs with 9” spacing. Replaces CIH no. 472593R3.
$15.54
11966697
Bearing spool, 4” long for square axles. Fits models 37, 46, 48, 60, 61, 76, 120, 122, 130, 132, 150, 330, 350, 370, 470, 480, 490, 610, 760 discs with 7 1/2” and 9” spacing. Replaces CIH no. 472591R3.
$13.96
11347572
Steel bearing strap used with CFC part number HC243736.AGCO-Gleaner 300, 400, 500, 700, 800, 7000, 7200, 8000, 8200, 9250;Case-IH 1010, 1020, 2010, 2020, 3020;Claas Lexion F with HCC reel;John Deere 900 s/n 645301 & up;Massey Ferguson 9250, 9700, 9750, 9800, 9850;New Holland 971, 973, 71C, 72C, 73C, 74C, 740CF.
$4.04
11436788
Bearing to fit over a 1 1/2" round arbor bolt. Replaces BCA number DS209TT4 and fafnir number W209PPB4. Used with 85 mm flanges.O.D. of 3.347.Inside race width 1.188.Outside race width 1.188.
$22.36
11459004
Bearing to fit over a 1 1/2" round arbor bolt. Replaces BCA number DS209TTR4 and fafnir number GW209PPB4. Used with G85 flanges.O.D. of 3.347.Inside race width 1.188.Outside race width 1.188.Used on:Case-IH 6650, 6700, 6750 coulter chisels.DMI Colter®Champ II.Farmhand-Glencoe disc ripper Yield Builder 552A, YB8400 disc gang and rolling basket.GlencoeSoil Saver® & Series III.Soil Finisher.Kuhn Krause discs 900-908, 952-969, 1144-1156, 1401-1428.Landoll Soil Master coulter chisels.Sunflower discs E, F, TA1, 1230.
$22.82
11439079
Bearing in riveted steel flange with 1.5" round center hole. Commonly used on Krause 1590, 1576-1592A, 1900-1928, 1952-1979, 2100-2166, 2190-2196, 2200-2244, 3948-3957, 3990-3994, 4900-4945, 4900A-4927A, 4950-4994., others.Used on Great Plains for disc gang on Ultra-till UT3030, UT5036, UT5042, UT5048, UT5052 and rolling spike harrows and rear baskets on some models.
$33.34
11448463
Bearing with 1 1/2" Square Center, Flat O.D. Replaces fafnir number W211PP3 and BCA number DC211TT3.
$34.26
11452033
Relube disc bearing, curved outer race.Commonly used on the following makes and models: Allis Chalmers 2600 discs with 4-bolt flange bearings.Amco discs, Athens discs, Brillion discs, Burch discs, Bush Hog discs, Case discs, Ford 243, 246 discs, GreenLine discs.Massey Ferguson 30, 40, 720, 730 discs.McFarlane Reel Disc vertical tillage RD4012, RD4014, RD4016, RD4020, RD4025, RD4030, RD4035, RD4044, RD4045 to s/n 12946 disc gang.McFarlane Reel Till vertical tillage RT2012, RT2016, RT2020, RT2025, RT2030, RT3012, RT3016, RT3020, RT3025, RT3030, RT3035 disc gang.White/Oliver 265, 281 discs.
$34.79
11450177
Riveted flange bearing with 1.25" square center hole. For Case-IH:Late 200 Tigermate field cultivator, True-Tandem 330 Turbo, 870 ripper; all 875 rippers. Rolling baskets with square bore bearing.Great Plains:Turbo-Max to s/n C3156H rolling spike harrow with square bore bearing. 1000TM, 1200TM, 1500TM, 1800TM, 2400TM, 3000TM, 3500TM, 4000TM, 4800TM.Turbo-Till to s/n 5250NN rolling spike harrow with square bore bearing. 1000TT,1200TT, 1500TT, 1700TT, 1800TT, 2200TT, 2400TT, 3000TT, 4000TT.Kuhn Krause rolling reel basket on Excelerator 8000-14, 8000-20, 8000-25, 8000-30, 8000-40, 8000-50.Select FlexKing, Kent, Summers, Sunflower, Quinstar tillage equipment.
$37.71
11452341
Bearing with 1 1/8" square center. Replaces BCA number DS208TT8 and fafnir number W208PPB8. O.D. is 3.150 Inside race width 1.438 Outside race width 1.188
$20.89
11438495
Sealed disc harrow bearing with a flat outer race. ** Verify dimension before ordering.***Fits select models of Athens, Burch, John Deere, Forrest City, International Harvester, Kewanee, Massey Ferguson, Multi-Purpose, and Piper discs.Bore: 1 1/8" squareOD: 3.150"Inside race width: 1.438"Outside race width: .709"
$22.51
11439074
Bearing with 1 15/16" Round Center. Replaces BCA number DS210TTR2 and fafnir number GW210PPB2.
$28.39
11420779
Bearing to fit over a 1.75" round arbolt bolt. Replaces BCA number DS209TTR2 and fafnir number GW209PPB2. Used with G85 flanges.O.D. is 3.347Inside race width is 1.188Outside race width is 1.188
$37.91
11449844
Relube disc harrow bearing, riveted flange style, 1-3/4" round bore. Fits Case-IH discs 37, 46, 48, 60, 61, 120, 122, 130, 132, 150, 330, 340, 350, 370, 470, 475, 480, 485, 490, 496, 610, 760, 3800, 3850, 3900, 3950, RMX340. Conser-Till 60, 6000, 6500. Case-IH combo mulch finishers 4200, 4400, 4450.Fits Case-DMI Rolling baskets with round bore bearing on early 330 True Tandem disc and 870 ripper.Fits New Holland ST440 disc.Fits Remlinger rolling baskets.Fits Sunflower rolling baskets on 5033, 5034, 5035, 5054, 5055, 5056, 5135, 5232, 5332 field cultivator; Land Finisher 6211, 6212, 6220, 6221, 6331, 6332, 6333, 6430, 6432, 6433. Soil Conditioner 7210, 7230, 7250.Overall Width: 5"Hole Diameter is .531"
$31.60
11457913
This bearing has a flat OD to be used in cast housings. Replaces W211PP2 and DC211TT2.
$30.54
11330684
Bearing with 2 3/16" Round Hole. Used on John Deere Discs 310, 330, 331, 340, 350, 360, 370. 1700, 1710, 1710A Mulch Tillers with 1-1/4" square axle.
$34.79
11444877
Bearing with 1 1/8" square center. Replaces BCA number DS208TTR8 and fafnir number GW208PPB8. O.D. is 3.150 Inside race width 1.438 Outside race width 1.188
$21.31
11448477
Riveted flange bearing with 1 1/8" square center hole. Commonly used on Kewanee discs.
$37.77
11425795
Bearing with 2 3/16" Round Hole. Replaces fafnir number GW211PPB2 and BCA number DS211TTR2. Used with G100 flanges.
$31.70
11447991
Bearing with cross hole to fit gauge wheel assemlies, has a 40 mm O.D. to eliminate the use of the bearing spacer.
$10.18
11451154
Bearing with a groove to fit gage wheel assemblies, has a 40 mm O.D. to eliminate the use of the bearing spacer.
$10.18
11442471
Bearing with Grooved Stem. Used on John Deere, Great Plains, Krause, Lilliston/Melrose, Tye and United Farm Tool grain drills. John Deere, Massey Ferguson and Noble cultivators. John Deere MaxEmerge®2 1992 and after; all MaxEmerge®Plus, Pro; 1530 and 1535 with MaxEmerge®Plus. White 6000 series planter gauge wheel.
$8.35
11453551
Bearing with Rubber ring. Fits Krause series 1576-1592, 1900-1928, 1952-1979, 2100-2166, 2190-2196, 2200-2244, 3948-3957, 3990-3994, 4900-4945, 4900A-4927A, and 4950-4994. Fits 1.5" round axles. Replaces BCA number CDS209TTR6P.
$60.93
11446374
Bearing with Rubber ring. Fits Krause series 1740-1767, 2400-2495, 5812-5824, 8300, Land Builder 4880 series. Excelerator 8000-14, 8000-20, 8000-25, 8000-30, 8000-40, 8000-50. Also Great Plains heavy disc gang assembly on 3323DH, 3326DH, 3329DH, 4330DH, 4333DH, 4336DH; late Turbo-Till 1000TT, 1200TT, 1500TT, 1700TT, 1800TT, 2200TT, 2400TT, 3000TT, 4000TT; Turbo Chopper 1200TC, 1500TC, 1800TC, 2400TC, 3000TC, 4000TC. Turbo-Chisels TC5109-TC5323, TCN5107-TCN5313; Turbo Max 1200TM, 1500TM, 1800TM, 2400TM, 3000TM, 3500TM, 4000TM.Also Landoll Weatherproofer disc ripper and disc chisel (use with original 1-1/2" I.D. bushing).
$66.07
11400994
Bearing to fit over a 1 3/4" round arbor bolt. This bearing replaces BCA number DS209TTR10 and fafnir number GW209PPB11. Used with G85 flanges.
$23.04
11443093
Bearing for guage wheel assembly; 40 mm OD. Case-IH: gauge wheel on 1200 series s/n CBJ0001611 & up; SDX30, SDX40 air seeders; 500, 500T Precision Disk Drills.John Deere: Fits all gauge wheel on XP, XP Pro; 1530, 1535 with XP. Fits rubbber closing wheel on MaxEmerge®Plus, Pro, XP, XP Pro; 1530, 1535. Fits cast closing wheel arm on grain drills 1560, 1565, 1590, 1690, 1835, 1860, 1895, 1990. 4 bolt notched marker blades used on 1700 and DB series planters; 7200, 7240, 7300, 7340 built 1995 and after.Drills 750, 1520, 1530, 1535, 1560, 1565, 1590. Gauge wheel and cast sealing wheel on 2510H applicator.Kinze: Gauge wheel, closing wheel bearing.Great Plains: 2" x 13", 3" x 13" press wheels 1997 and after with steel wheel halves.2.5" x 16, 3" x 16, 4.5" x 16" gauge wheels on planters and 10H, 15, 25 series drills 1998 & after with 15" openers.Hiniker: Fits gauge wheel on late 4200 air seeders.Martin: Spading-Closing Wheels on late 1700 with MaxEmerge®Plus, XP; John Deere 7000-7100; Kinze®; White 6000, 8000.Monosem Plus: gauge wheel on late models and closing wheels.New Holland: SP280, SP380, SP480, SP580 all s/n PNL001065 & up; P2080, P2085 Disk Drills.White: gauge wheel on 8000, 9000 series. Late 6000; 8000, 9000 rubber or cast dual closing wheels.CrustBuster, Krause, Landoll, Sunflower, Sukup: Fits grain drill gauge wheels.
$10.48
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0025
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.
$26.00
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$27.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$8.00
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$76.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$31.45
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$33.00
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$35.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$26.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$34.00
LL0574
LED 2 x 5 LED light for the top front cab on the 55 & 60 series + 6000-7000-8000 series tractor. Flood beam.
$34.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$100.00
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$219.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$64.00
