Search
You have no items in your shopping cart.
Show All Products
11441495
Spike for Field Cultivator, 3/8" tube. Requires 7/16" hex head bolts on 1.75" spacing.
$40.47
11460113
Spindle with nut and washer, made in the USA by GKN wheels. Used with W669 hub, sold serperately.
$45.09
11446389
Spindle with nut and washer, made in the USA by GKN wheels. Used with W888 hub, sold seperately.
$64.27
11449262
Spindle with nut and washer, made in the USA by GKN wheels. Used with W888 hub, sold seperately.
$74.31
11442180
Spindle with nut and washer, made in the USA by GKN wheels. Spindle diameter is 2.12" and the spindle is 15.438" long.Used with W778 hub, sold seperately.
$94.59
11436589
Spindle with nut and washer, made in the USA by GKN wheels. Used with W803 hub, sold seperately.
$121.43
11446472
Spindle with nut and washer, made in the USA by GKN wheels. Used with hubs W819 or W821, sold seperately.
$111.49
11443290
Spindle for CAST750 wheel. Fits JD 750 s/n 5673 & up. Left hand threads. Replaces JD N280565.
$43.61
11452856
Spindle, left hand, for seed hub/gauge wheel arm on models 1560, 1565, 1860, 1690, 1890, 1895, 1590, 1990. (has LH threads)
$0.00
11462103
Spindle with nut and washer, made in the USA by GKN wheels. Used with W783 hub, sold seperately.
$71.99
11448383
Spindle for CAST750 wheel. Fits JD 750 s/n 5673 & up. Right hand threads. Replaces JD N280564.
$43.61
11439089
Spindle, right hand, for seed hub/gauge wheel arm on models 1560, 1565, 1860, 1690, 1890, 1895, 1590, 1990. (has RH threads)
$0.00
11442468
Spindle, weld-on, used with some Yetter 2995, 2996, 2930, 2950, 2999, 2960.
$26.55
11443082
Spirol Roll pin for attaching V-Slice inserts to planters (front hole only). One used per row on JD and White planters.
$1.05
11444883
1/2" splined pin for M & W Earthmaster and Sunflower rippers. Sold by the piece.
$3.26
11449468
Split bushing to fit JD 960; 1050 s/n 1851 and above; 1060 field cultivators. 724 mulch finisher; 875 row crop cultivator. Repl. JD no. N188780.
$5.35
11981530
Split bushing to fit JD 980 prior to s/n 5159, 985 prior to s/n 443 field cultivators. 726 prior to s/n 699 mulch finisher. Replaces JD no. N231875.
$5.88
11452652
Split bushing to fit JD 980 s/n 5160 and above, 985 s/n 444 and above, 2200, 2210 field cultivators. 2310 mulch finisher. Replaces JD no. N233669.
$5.88
11446556
Split sickle, complete for 1020, 22.5', single point sections. Does not include knife head.
$916.50
11459212
Split sickle for Agco 25' heads, series 2-8 equipped with Crary Gold n Cut. Does not include knife head.
$956.14
11450375
Split sickle, complete for 1020, 25', single point sections. Does not include knifehead.
$910.61
11440325
Split sickle, 25' with big tooth sections for Agco Flex heads series 2-8 and Massey 9850 with OEM cutting guards.
$956.14
11438140
Split sickle with big tooth sections to fit JD 925 and 925F. Does NOT include knife head.
$969.63
11451155
Split sickle, complete for 1020, 17.5', single point sections. Does not include knife head.
$796.95
11445689
Sickle for IH 820, 17.5' head. Works with Crary Guards or OEM Guards.ThunderBolt Sickle...Crary's piece by piece design lets you build the exact sickle bar length you need. Easy to assemble interlocking/overlapping bar bolts together for greater convience. Drive head is sold seperately.
$775.54
11443664
Split sickle, 30' with big tooth sections for Agco Flex heads series 2-8 and Massey 9850 with OEM cutting guards.
$1,009.25
11461307
Split sickle for 20' double drive heads on models 971, 972, 973, 73C, 74C.Does NOT include sickle drive heads.
$1,009.25
11458708
Split sickle, complete for 1020, 30', single point sections. Does not include knifehead.
$961.19
11442886
Split sickle with big tooth sections. Does NOT include knife head.
$670.77
11453644
Spool for 7 1/2" spacing. Fits models 46, 48, 60, 61, 120, 122, 130, 132, 150, 330, 350, 370, 470, 475, 480, 485, 490, 496. Replaces CIH number 481416R1.
$28.39
11453616
7.25" Disc spool, fits models 210, 215, 220, 230, 235, 621, 627, 630, and 637 discs with 7.25" spacing. Also, 722, 724, and 726 mulch finishers.
$32.07
11449973
Spool for 9" spacing. Fits models 37, 46, 48, 60, 61, 120, 122, 130, 132, 150, 330, 350, 370, 470, 475, 480, 485, 490, 496, 610, 760.
$31.60
11460409
9" Disc Spool for 1 1/4" square, fits models 315, 335, 355, 375, 635, 640, 650, 670 discs also 637 disc with C spring bearing hanger.
$49.85
11454830
Tension Spring for Hitchhiker, LBI, M & W, and otherharrows, 5/16" wire, 2" OD. 14.5" long.Made in the USA.
$25.72
11966694
Spring Loaded Hold Down, used on CIH 1020 (with Crary 7229 guards. Put the spring back into your cutting system. Any cutting system performs best when well adjusted. Only Crary's Gold n' Cut offers spring loaded adjustable hold downs as a standard feature on combine and hay cutting systems. This innovative feature adjusts pressure with the turn of a bolt, allowing you to maintain uniform hold down pressure while operating a free flowing sickle. Replaceable nylon wear pads offer 3-4 times the life to the hold downs.
$28.38
11445679
Spring loaded hold down clip. Used on John Deere 200 and 900. Also Agco series 2-8. and Massey 9100, 9850. Can be used with OEM or Crary Guards. Put the spring back into your cutting system. Any cutting system performs best when well adjusted. Only Crary's Gold n' Cut offers spring loaded adjustable hold downs as a standard feature on combine and hay cutting systems. This innovative feature adjusts pressure with the turn of a bolt, allowing you to maintain uniform hold down pressure while operating a free flowing sickle. Replaceable nylon wear pads offer 3-4 times the life to the hold downs.
$28.38
11450071
Spring Loaded hold down for CIH 820, 1010 with Crary Guards and also CIH 1020 with OEM Guards.Put the spring back into your cutting system. Any cutting system performs best when well adjusted. Only Crary's Gold n' Cut offers spring loaded adjustable hold downs as a standard feature on combine and hay cutting systems. This innovative feature adjusts pressure with the turn of a bolt, allowing you to maintain uniform hold down pressure while operating a free flowing sickle. Replaceable nylon wear pads offer 3-4 times the life to the hold downs.
$28.38
11448853
Spring loaded hold down for CIH 1020 with Crary 7228 guards, 2020, 3020; New Holland 970, 971, 972, 973, 71C, 73C, 74C, 740C.
$28.38
11452859
Heavy Duty down pressure spring with hooks for Kinze planters built 1989 and later. 1.5" OD.** Made in the USA **
$17.69
11456030
Heavy duty down pressure spring with plug.Fits MaxEmerge™ ; Kinze prior to 1989. Used in Shoup and Yetter spring kits (on MaxEmerge™ ; units); White 6000, 8000 planter contact drive wheel.
$15.28
11461113
Bearing with 19 tooth sprocket, 7/8" hex bore, 2-1/8" width. Used on 7200-7300 and 1700 series planters row unit and planter drive line.
$23.43
11442991
Tension spring for lower idler sprocket. Fits 40 series: 243, 244, 343, 344, 443, 444, 642, 643, 644, 842, 843, 844, 1243.90 series: 494, 693, 694, 893, 894, 1290, 1293.600C series: 606C, 608C, 612C, 612FC, 616C.700C series: 706C, 708C, 708FC, 712C, 712FC, 716C, 718C.
$4.25
11445693
Standard down pressure spring, bolts to side of parallel arms. Two or four used per row. Used on John Deere planter row units MaxEmerge®2, Plus, Pro, XP Pro, MaxEmerge5. John Deere drills 1530, 1535. Also fits 1700 series planter transmission contact wheel, 2 used.
$9.60
11447465
Poly cover for the stabilizer pad. Made from 1/4" thick, yellow, virgin UHMW.
$59.72
11432384
Sprocket and Bearing with 19 tooth sprocket, 7/8" hex bore, 1-1/2" width. Used on John Deere 7200, 7300 and 1700 series planters row unit and planter drive line.**Verify width before ordering.**
$26.24
11452660
Strip Till knife with 3/8" tube and a 1 1/2" dry tube.
$195.75
11462403
Standard S tine for danish shovels; mounts to a 2" square tube. Ground clearance is 14.5", accepts 3/8" shovel bolt. Shank is 1.25" wide at the mounting clamp, 3/8" thick.Overall Height is 21".Case-IH 133, 183 row crop cultivators.John Deere RM, FM, 75, 85, 725, 815, 825, 845 row crop cultivators.
$20.74
11440324
Stationary knifeFits 9400, 9410, 9450, 9500, 9510, 9550, 9560, CTS, CTSII, 9650CTS, 9660CTS (29);9600, 9610, 9650, 9660, 9560STS, 9660STS, 9760STS, 9860STS (35);9650STS to s/n 700500, 9750STS to s/n 700600 (29);9650STS s/n 700501 & up, 9750STS s/n 700601 & up (35);9570STS (31);9670STS, 9770STS, 9870STS (39);S550 (31);S650, S660 (39);S670, S680, S690, S760, S770, S780, S790 (39 w/fine cut, 49 w/extra fine cut).. Hardware not included.Made in the USA!!
$6.63
11453059
Kit, fits TR86, TR87, TR88; late model TR95; TR96, TR97. Replaces NH number 688331. Heat treated. Includes 3 smooth edge knives, 3 bushings, bolts and lock nuts. 7” long, 2-1/4” wide.
$28.39
11457514
Replacement steel auger finger. Used on 900 series heads and some 200 series head.
$8.03
11347560
Mounting bracket for the reel tine. Does not include tine or hardware. Minimal welding is required to hold the bracket into its proper location.
$1.22
11461208
Universal approximately 5 3/4" steel wear plate, heat treated. Fits most combines and mowers of all makes.
$2.36
11445480
Steel Wear Ring for use with the Seal. Used on the back side of the seed hub on models 1560, 1565, 1860, 1690, 1890, 1895, 1590, 1990
$3.87
11453950
Tine to fit Remlinger Chisel Plow levelers, Clamp part number is J00008, sold seperately.Shank is 1 3/4" wide at the top. Overall length is 25 1/2". Ground clearance is 17 1/2".
$60.93
11451165
7.6lbs reversible chisel spike, uses 1/2" hex head bolts on 2 1/4" to 2 1/2"spacing. 7/8" thick x 19 1/2" long.
$42.56
11968696
CFC Straight Chisel spike, Heavy duty. Bolt Spacing: 2.25” to 2.5”
$68.37
11443386
Straw chopper tooth kit. Fits many models, heat treated. Sold with hardware.
$10.30
11449464
Strip-till knife with 3/8 tube and strip-till protection. Designed for a fertilizer placement of 6" to 10" deep.
$185.36
11457524
Straight chisel spike with chrome cap. Uses 1/2" plow bolts on a 2.5" bolt spacing. Recent field test have shown this to be our best wearing chisel spike. Excellent quality. Made in the USA.
$111.63
11437775
Fits all 95 (4) and 105 (5). Also fits 3300 (3), 4400 (6), 6600 (6), 7700 (5) with long shafts that knives pivot on. Set of 6 knives, no hardware. Heat treated. 9 5/8" long.
$31.60
11462507
Strip-till knife with a single 1-1/2" tube for dry fertilizer.
$186.42
11457616
15" Sunflower Opener Assembly ; for drills with offset openers; built prior to 2001. Fits Sunflower 9100, 9200, 9300 and 9400 series drills. 3.5 mm blade with hub and bearing.
$45.82
11445496
15” Sunflower Opener Assembly ; for drills with inline openers; built 2001 and later. Fits Sunflower 9100, 9200, 9300, 9400, 9500, 9600 series drills; Morris Air Seeders.. 3.5 mm blade with hub and bearing. Replaces Sunflower part number 9753, 18358
$45.82
11456335
SW bracket, 7 hole, 7/16” punch, 1-3/4” c.c. for use on field cultivators.
$20.62
11448002
The original Talc is fluffier than the Low Drift talc and coats the seed better and is less costly than the Fluency Powder.
$55.33
11454546
Graphite and talc mixture. 80% talc and 20% graphite. 8 lbs container.
$29.42
11442162
Quick Tach links for manure spreader aprons. * Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.Approx. Links per 10 ft.: 47 Avg. Ultimate Strength: 16,000 lb Pitch (P): 2.550 Inside Width (D): 1.093" Thickness (T): 0.312"T-bar links feature a clean design that prevents clogging or binding and allows for easy assembly/disassembly. This chain offers a longer wear life than steel detachable or steel pintle chains, due to its material thickness.
$3.73
11457404
Threaded bushing, 1" inside diameter. Used on Early MaxEmerge planters with threaded arms, also used on Kinze 2000 series with CFC gauge wheel arms.
$11.71
11447190
Tapered roller bearing. Used in JD750 seed opener and Tye No-till coulters.
$5.51
11448376
Tool to break #60 to #100 chain.Picture shows the smaller tool (RCB1), RCB2 is very similar.
$41.25
11453347
Top inner bushing for press wheel arm on 1560, 1590, 1690, 1860, 1890, 1895, 1990 Replaces JD no. N284086. 2 3/8" wide x 1.010" OD. Requires the use of a 5/8" flat washer.
$13.78
11451953
Top wind jack, 5000 lbs. lift capacity, 7000 lbs. static capacity, 15" lift. This jack uses a tubular mount.
$88.35
11457711
Replacement bushing for CFC part no.APQ25502B and AP79648 (XP); 16mm hole.John Deere planters late MaxEmerge®2; MaxEmerge®Plus, Pro-Series, MaxEmergeXP, Pro-SeriesXP; 1530, 1535 drills.
$11.71
11452631
Achieves coulter tillage and residue managementFeatures a wide range of depth settingsHas lock-down and floating featuresDoes notinterfere with coulter adjustmentKeeps residue between rowsIs offered with staggered, parallel or interlocked wheelsCompatible with JD no-till coulter onlyIs compatible with Precision Planting CleanSweep™Made by Yetter Manufacturing www.yetterco.comThis unit comes with Shark Tooth Wheels and Floater Wheels.
$768.42
11969993
Torsion spring, left hand for cast closing wheel. Used on models 1560, 1590, 1690, 1860, 1890, 1895, 1990 to s/n 780100.
$11.10
11455338
Torsion spring, LH, for press wheels and closing wheels on models 750 and 1850. Replaces JD no. AN214511.
$10.65
11445492
Torsion spring, RH, for press wheels and closing wheels on models 750 and 1850. Replaces JD no. AN214510.
$10.65
11424900
Right torsion spring for cast closing wheels.Used on John Deere models:1560, 1590, 1690, 1860;1890, 1895, 1990 to s/n 780100.
$11.10
11453436
Developed for use in spreaders, its unique design increases fatigue life and wear life and reduces stretching. It runs smoothly and quietly on standard #67 sprockets.Approx. Links per 10 ft.: 50 Avg. Ultimate Strength: 16,000 lb Pitch (P): 2.388"Inside Width (D): 1.125"Thickness (T): 0.437"
$6.78
11458120
Tru-Tube® tool for 12" diameter platform augers.Use on models:Case-IH 810, 820Massey Ferguson 1859New Holland 960.
$59.75
11461409
Trunion Bearing Assembly with relube bearing, shields and retainer.Fits the following make and models:Challenger Vertical tillage 6610, 6630, 6631, 6650 disc gang and reel.Kongskilde Vertical tillage 9115, 9125, 9132, 9212, 9220, 9223, 9243 disc gang.Landoll * Discs 6210, 6211, 6230, 6231, 6250 disc gang and reel.* Vertical tillage 7410VT, 7430VT, 7431VT, 7450VT disc gang and reel.* Coulter chisels 2110, 2111, 2130, 2131 disc gang.* Disc chisels 2210, 2211 disc gang.* Rippers Weatherproofer I 2410, 2410F, 2410AFG, 2430; Weatherproofer III 2310 disc gang and chopper reel.Massey Ferguson Vertical tillage 6610, 6630, 6631, 6650 disc gang and reel.Sunflower * Soil Conditioner 7211, 7212, 7231, 7232, 7251, 7252 pull type rolling harrow.* Discs 1130, 1211, 1212, 1231, 1232, 1233, 1234, 1321, 1331, 1431, 1432, 1433, 1434, 1435, 1436, 1441, 1442, 1443, 1444, 1541, 1543, 1544, 1550, 6630, 6631 disc gangs.* Rippers 4010, 4110, 4306, 4310, 4311, 4410, 4411, 4412, 4510, 4511, 4530 disc gang.* Vertical tillage 6610, 6630, 6631, 6650 disc gang and reel.* Coulter chisels 4211, 4212, 4213, 4232, 4233 disc gang.
$105.87
11454046
Tru-Tube® tool for 14" diameter platform augers.Use on models:Case-IH 1010, 1020Massey Ferguson 2166, 2381, 9000, 9100New Holland 970, 971, 972, 973, 71C, 72C, 73C, 74C.
$59.75
11459823
Tru-Tube® tool for 16" diameter platform augers.Use on:Case-IH models 2010, 2020, 3020Gleaner models Series 3, 300, 400, 500, 700, 800, 7000, 7200, 8000, 8200 John Deere models 200, 900, 600Massey Ferguson models 7000, 7200, 8000, 8200, 9800, 9850 New Holland model 740C.
$59.75
11453237
Tube and bracket assembly to allow you to put fertilizer behind a sweep/point on a chisel plow.
$31.07
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0025
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.
$26.00
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$27.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$8.00
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$76.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$31.45
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$33.00
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$35.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$26.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$34.00
LL0574
LED 2 x 5 LED light for the top front cab on the 55 & 60 series + 6000-7000-8000 series tractor. Flood beam.
$34.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$100.00
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$219.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$64.00
Recently viewed products
