Cables

•    The TEXA Cobus D89 Cable (T73) is used to perform diagnosis on Cobus airport buses. Note: This cable requires the use of the Truck & Off-Highway Power Supply and Adapter Kit to connect to the Navigator TXTs diagnostic adapter to perform a diagnosis. Only available in the United States.

•    Genuine TEXA cable. •    For AGCO / Fendt agricultural equipment. •    Works with the TEXA Navigator.

This is a diagnostic cable used to connect the TEXA Navigator adapter to AGCO / Fendt tractors. Fendt is a leading brand of tractors for the AGCO American agricultural machinery manufacturer.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA cable. •    For Bobcat machines. •    Works with the TEXA Navigator.

This is a 7-pin diagnostic cable used to connect the TEXA Navigator adapter to Bobcat equipment for machine-side diagnostics.

Enhancements have been done to the E-Series Excavator and the S-Series Skid Steer loaders. The TEXA Off-Highway diagnostic system has always had coverage for both the Kubota and Bobcat engines, you can now perform “Vehicle Total Diagnosis”. This command will examine the entire Bobcat system and give you a quick look at inactive and active fault codes, along with looking at over 4,400 parameters.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter Only available in the United States.

•    Genuine TEXA cable. •    For Carraro lifter for Massey Ferguson, John Deere, and Claas. •    Works with the TEXA Navigator.

This is a 3-pin diagnostic cable used to connect the TEXA Navigator adapter to Carraro rear linkage on Agricube, Claas Nectis and Nexos series, John Deere series 5015 and 5000G, Massey Ferguson series MF3600 and Valtra series A tractors.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA cable. •    For CAT construction equipment. •    Works with the TEXA Navigator.

This is a 14-pin diagnostic cable used to connect the TEXA Navigator adapter to 2015 and newer Caterpillar construction equipment with a round 14-pin connection.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA cable. •    For CAT and Perkins off-highway equipment. •    Works with the TEXA Navigator.

This is a 9-pin diagnostic cable used to connect the TEXA Navigator adapter to CAT and Perkins off-highway equipment. Caterpillar and Perkins equipment uses a slightly different 9-pin connector which requires this cable.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA cable. •    For Deutz engines. •    Works with the TEXA Navigator.

This is a 12-pin diagnostic cable used to connect the TEXA Navigator adapter to vehicles with Deutz engines.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA cable. •    For Doosan equipment. •    Works with the TEXA Navigator.

This is a diagnostic cable used to connect the TEXA Navigator adapter to Doosan heavy equipment.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Doosan equipment. •    Works with the TEXA Navigator.

This is a 6-pin diagnostic cable used to connect the TEXA Navigator adapter to Doosan engines in Tier 4 Bobcat equipment.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Hitachi 3 Series equipment. •    Works with the TEXA Navigator.

This is a 6-pin diagnostic cable used to connect the TEXA Navigator adapter to Hitachi 3 Series equipment.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Hyundai construction equipment. •    Works with the TEXA Navigator.

This is a 9-pin diagnostic cable used to connect the TEXA Navigator adapter to Hyundai excavators and loaders.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Komatsu construction equipment. •    Works with the TEXA Navigator.

This is a 12-pin diagnostic cable used to connect the TEXA Navigator adapter to Komatsu backhoe loaders, loaders, excavators, dozers, and motor graders.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Kubota engines. •    Works with the TEXA Navigator.

This is a 4 pin diagnostic cable used to connect the TEXA Navigator adapter to Kubota engines in agricultural and construction equipment.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Landini and McCormick agricultural equipment. •    Works with the TEXA Navigator.

This is a 4 pin diagnostic cable used to connect the TEXA Navigator adapter to Landini and McCormick tractors.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Massey Ferguson agricultural equipment. •    Works with the TEXA Navigator.

This is a 16-pin diagnostic cable used to connect the TEXA Navigator adapter to Massey Ferguson tractors series 5400, 6400, 7400, and 8400.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For MTU engines with MDEC 2. •    Works with the TEXA Navigator.

This is a 16-pin diagnostic cable used to connect the TEXA Navigator adapter to MTU engines with MTU Diesel Engine Control (MDEC).

MTU Friedrichshafen GmbH is a manufacturer of commercial internal combustion engines founded by Wilhelm Maybach and his son Karl Maybach in 1909. MDEC (MTU Diesel Engine Control) made its debut in the 1990s, which controlled diesel engines with either unit-pump fuel injection or the common rail system, which was still quite new at the time.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For New Holland equipment with diagnosis button. •    Works with the TEXA Navigator.

This diagnostic cable is used to connect the TEXA Navigator adapter to New Holland vehicles series TM I and II.

Certain New Holland equipment does not require a computer to connect to the vehicle to retrieve codes. This New Holland diagnosis button cable for the TM 2nd Series tractors is what this cable is for. At the rear PTO, there will be a connector port, and this cable will connect to it. Simply press the button, and the blink codes will then flash on the driver display panel.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    For New Holland TN series tractors. •    Works with the TEXA Navigator.

This is a 5-pin diagnostic cable used to connect the TEXA Navigator adapter to New Holland TN, TNA, and TL series tractors. New Holland is owned by CNH Industrial.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Class and Renault equipment. •    Works with the TEXA Navigator.

This is a 4-pin diagnostic cable used to connect the TEXA Navigator adapter to Claas and Renault equipment.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    For SDF group and Claas agricultural equipment. •    Works with the TEXA Navigator.

This is a 14-pin diagnostic cable used to connect the TEXA Navigator adapter to Same-Deutz-Fahr vehicles and Claas combine harvesters and shredders.

SAME-Deutz-Fahr is also known as SDF group. Their products are produced under the names of SAME, Deutz-Fahr, Lamborghini Tractor, Huerlimann Tractors, Gregoire, and Lamborghini GreenPro.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Scania engines. •    Works with the TEXA Navigator.

This is a 4-pin diagnostic cable used to connect the TEXA Navigator adapter to Scania tier 4 engines in Doosan equipment. This will be the connector you need to diagnose your loaders, dumpers, and excavators.

Coverage now includes: •    DA-Series Dumpers – This equipment uses Scania Tier 3, 4, and 4F engines. Coverage includes live data, read/clear fault codes, and 30+ bi-directional commands such as DPF regen, VGT calibrations, cylinder cut-out test, SCR commands, and many more. •    DX-Series Excavators – Besides the Scania engines as mentioned above, this series of Doosan equipment could also have a Cummins engine, which is covered by TEXA as well. Over 70 commands and activations are available for Cummins engines to give you complete diagnostic coverage. •    DL-Series Loaders – The Doosan DL-Series loaders use Scania engines, which is the same as the DA-Series dumper and covered very well. The DL-Series is also covered on the transmission end, as they use the ZF Ergo Power EST37 transmission. This system will read all fault codes and live data, and perform 16 commands and activations on this transmission model.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For SISU, Danfoss, and Carraro equipment. •    Works with the TEXA Navigator.

This is a 9-pin diagnostic cable used to connect the TEXA Navigator adapter to SISU engines, Danfoss, and Carraro transmissions.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Valtra agricultural equipment. •    Works with the TEXA Navigator.

This is an 8-pin diagnostic cable used to connect the TEXA Navigator adapter to Valtra tractors.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA adapter. •    For Yanmar engines. •    Works with the TEXA Navigator.

This is a diagnostic cable used to connect the TEXA Navigator adapter to Yanmar engines in construction equipment.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

TEXA Retrofit Kit For Old Bobcat Machine (3907644) Cable

•    For Cummins engines in Truck and OHW applications. •    Works with the TEXA Navigator.

This is an 8-pin diagnostic cable used to connect the TEXA Navigator adapter to Cummins ECMs for truck and off-highway vehicles with a 3-pin connector.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Allows custom pin out. •    Works with the TEXA Navigator.

For the TEXA Off-Highway (OHW) module, sometimes those really rare and unique pieces of equipment don't have a standard cable. This is where the 3151/T07 cable kit comes into play. The TEXA software will tell you exactly how to use this cable kit if it is called upon so you can make a custom pin out connection to your equipment.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.

•    Genuine TEXA cable. •    For Volvo construction equipment. •    Works with the TEXA Navigator.

This is a 14-pin diagnostic cable used to connect the TEXA Navigator adapter to Volvo construction equipment with a round 14-pin connector.

Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter. Only available in the United States.