You have no items in your shopping cart.

Points and Shins

Filters
per page
11459122
10" winged heavy-duty point with hardfaced wings. Mounts with one horizontal bolt through 1-1/2" wide shank.Fits DMI Case-IH Turbo-Tiger®, Tiger-Two®, Turbo-Tiger® II; 530, 530B, 530C, 730, 730B, 730C; 9300, ST770, ST775 rear shanks. Pack of 1
$206.65
11452356
Wiese subsoiler point to fit DMI and Case-DMI. 2" wide to fit 1.25" shank width. Fits DMI Coulter Champ©II & II HD, 500, 527, 527B, 690, 870, 900, 1000, 1300, MRX690, ST720, ST740; 2500 and ST650 with curved parabolic or MRD shanks; 6750 parabolic. Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775.Made in the USA. Pack of 1
$121.34
11460810
Wiese subsoiler point to fit DMI and Case-DMI. 2" wide to fit 1.5" shank width. **Made in the USA. Pack of 1
$135.04
11441089
7" no-till point ripper point. Fits DMI 2500 and ST650 inline with 3/4" wide no-till shanks. Pack of 1
$127.66
11449354
Point 7" capped sub soiler point with hardfaced wings; for 1-1/4"wide shanks. Fits DMI 500, 527, 527B, 690, 870, 900, 1000, 1300, MRX690, ST720, ST740; 2500 and ST650 with curved parabolic or MRDshanks; 6750 parabolic. Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775. Sunflower 4610, 4630.Salford. Pack of 1
$176.81
11451075
Booted subsoiler point. 2.5" wide x 8" long. Has 6" cap welded on the top. Pack of 1
$57.65
11443579
Booted subsoiler point. 2.5" wide x 8" long. Prior to Case-DMI. Pack of 1
$35.53
11455249
Conservation Ripper Point with 10" wings for Case-DMI Ecolo Tiger with 1-1/4" shank Also Krause Dominator. Pack of 1
$250.10
11422826
Conservation Ripper Point for Case-DMI Ecolo Tiger with 1-1/4" shank. No wings, 2.5" wide. Pack of 1
$330.69
11457120
Conservation Ripper Point for Case-DMI Ecolo Tiger with 1-1/2" shank. No wings, 2.5" wide. Pack of 1
$222.29
11440688
Coverboard, 4", bolt spacing is 2-1/4". 3/8" thick. Fits Case-IH 527B, 530B, 530C, 690, MRX690, 730B, 730C, 870, 875, 6700, 6750, 9300; 2500 with curved parabolic shanks.Fits DMI Colter Champ®II HD, Tiger-Two®, Turbo-Tiger®II, 500, 527, 527B, 530B, 530C, 730B, 730C, 900, 1000, 1300, 9300; 2500 with curved parabolic shanks.Fits John Deere 2700 Mulch Ripper. Cannot be used with wear shins.Fits New Holland ST650, ST720, ST740, ST770, ST775.**Uses 7/16" x 1 1/4" plow bolts, sold separately. Pack of 1
$16.00
11454549
Coverboard, 6", bolt spacing is 2-1/4". 6 mm thick. Fits 527, 527B, 530B, 530C, 730B, 730C, 9300, ST650, ST720, ST770, ST775, 6750.**Uses 7/16" x 1 1/4" plow bolts, sold separately.Fits DMI 527, 527B, 530B, 530C, 730B, 730C, 6700, 6750, 9300, ST650, ST720, ST770, ST775. Pack of 1
$29.45
11460310
Conservation Ripper Point with 10" wings to fit Case-DMI Ecolo Tiger with the 1-1/2" shank. Pack of 1
$257.07
11449366
Conservation Ripper Point with 7" wings to fit Case-DMI Ecolo Tiger with the 1-1/2" shank. Pack of 1
$226.28
11447787
Conservation Ripper Point with 7" wings.Case-IH disc rippers 527B, 690, 870, 875, MRX690; 2500 with curved parabolic or MRD shanks; 6750 parabolic.Front shanks only on 530B, 530C, 730B, 730C, 9300.DMI disc rippers500, 527, 527B, 900, 1000, 1300; 2500 with curved parabolic or MRD shanks.Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300.Glencoe coulter chiselCC4450 with Deep Till shanks.New Holland disc rippersST720, ST740; ST650 with curved parabolic or MRD shanks.Front shanks only on ST770, ST775.Salford disc rippers9705, 9707, 9709, 9711, 9713, 9715, 9805, 9807, 9809, 9811, 9813 with curved parabolic shank.Sunflower disc rippers4610, 4630. Mount with RP12212 roll pin, order separately.White conservation chisel plows435, 445 with Deep Till shank. Pack of 1
$250.50
11456536
Wedge shaped shank protector (Shin) for MRD shank. Fits DMI and Case-IH MRD shanks only on 527, 527B, 530, 530B, 530C, 730C, 2500, 9300. Pack of 1
$40.43
11457227
Shin (Shank Protector) for Case-IH Mulch Till Ripper. Fits Case-IH rippers 690, MRX690 2008 & after with pre-drilled holes in shank; 870, 875. Pack of 1
$89.42
19339828
Ripper Point, 7” to fit 1 1/4” shank. Fits Krause Dominator, DMI Colter Champ®II & II HD, 500, 527, 527B, 690, 870, 900, 1000, 1300, MRX690, ST720, ST740; 2500 and ST650 with curved parabolic or MRD shanks; 6750 parabolic. Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775. Pack of 1
$195.74
36010934
Ripper Point, narrow (no wing) to fit 1 1/4” shank. Fits Krause Dominator, DMI Colter Champ®II & II HD, 500, 527, 527B, 690, 870, 900, 1000, 1300, MRX690, ST720, ST740; 2500 and ST650 with curved parabolic or MRD shanks; 6750 parabolic. Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775. Pack of 1
$176.07
Categories