Search
You have no items in your shopping cart.
Exact Align Pro
12333459
Update your John Deere MaxEmerge®XP, XP Pro, MaxEmerge 5, ExactEmerge planter gauge wheel arms to Exact Align Pro to ensure exact relationship of the gauge wheel tire to seed disk opener without the need to grease as would be needed with the OEM. Our exclusive design uses 3 rows of sealed ball bearings. Hardware is provided to ensure correct spacing used during the initial setup. Once installed these arms will provide long service life. They fit both the left- and right-hand applications and are reversible. Includes 2 arms and hardware. Pack of 1
$132.48
11459510
Closing Wheel Arm kit that utilizes ball bearings instead of bushings at the pivot points. Cast closing wheel arm with T-handle, pivot stop, spring, hardware. Fits John Deere planter row units MaxEmerge®2, Plus, Pro, XP, XP Pro. John Deere drills 1530, 1535. Includes cast closing wheel arm with T-handle, closing wheel arm stop, tension spring, pivot bushings (wheels not included). Pack of 1
$166.64
12068206
Exact Align Pro parallel arm row kit to fit John Deere XP, ME5, ME+ planter row units with the short 15-3/4-inch parallel arms. The Exact Align Pro arm kits is provided as a complete solution which includes two upper arms, one lower arm with pre-installed 204 series ball bearings and associated hardware. This kit is for use with row units attaching to wide mounting plates on the planter toolbar frame meaning the arms fit inside of the mounting bracket. Upper arms are made from precision laser-cut steel while the lower arm is made from super strong ductile cast which is nearly 2x heavier than the OEM part. Even brand-new OEM parallel arm and bushings allow for excessive play which only gets worse over time and use of the planter. The Exact Align Pro system is designed to eliminate unwanted play by ensuring positive connection points by employing sealed ball bearings for very long life. Exact Align Pro parallel arms are meant to be the last set of parallel arms you will ever buy as if any bearings were to fail, they can easily be replaced. Made in the USA. Pack of 1
$324.11
11988199
Exact Align Pro parallel arm row kit to fit John Deere XP, ME5, ME+ planter row units with the long 23-inch parallel arms. The Exact Align Pro arm kits is provided as a complete solution which includes two upper arms, one lower arm with pre-installed 204 series ball bearings and associated hardware. This kit is for use with row units attaching to wide mounting plates on the planter toolbar frame meaning the arms fit inside of the mounting bracket. Upper arms are made from precision laser-cut steel while the lower arm is made from super strong ductile cast which is approximately 40% heavier than the OEM part. Even brand-new OEM parallel arm and bushings allow for excessive play which only gets worse over time and use of the planter. The Exact Align Pro system is designed to eliminate unwanted play by ensuring positive connection points by employing sealed ball bearings for very long life. Exact Align Pro parallel arms are meant to be the last set of parallel arms you will ever buy as if any bearings were to fail, they can easily be replaced. Made in the USA. Pack of 1
$354.11
35820545
This kit consists of 2 Exact Align Pro upper parallel arms for John Deere XP series planters with 15-3/4" arms. Sold with 2 arms and hardware. Made in the USA. Pack of 1
$158.31
35822118
This kit consists of 2 Exact Align Pro upper parallel arms for John Deere XP series planters with 23" arms. Sold with 2 arms and hardware. Made in the USA. Pack of 1
$166.64
11442990
Exact Align Pro lower parallel arm to fit John Deere XP, ME5, ME+ planter row units with the long 23-inch parallel arms. The Exact Align Pro arm is made from super strong ductile cast which is approximately 40% heavier than the OEM part. Even brand-new OEM parallel arm and bushings allow for excessive play which only gets worse over time and use of the planter. The Exact Align Pro system is designed to eliminate unwanted play by ensuring positive connection points by employing sealed ball bearings for very long life. Exact Align Pro parallel arms are meant to be the last set of parallel arms you will ever buy. Made in the USA. Pack of 1
$207.46
11450263
Exact Align Pro lower parallel arm to fit John Deere XP, ME5, ME+ planter row units with the long 15-3/4” parallel arms. The Exact Align Pro arm is made from super strong ductile cast which is approximately 40% heavier than the OEM part. Even brand-new OEM parallel arm and bushings allow for excessive play which only gets worse over time and use of the planter. The Exact Align Pro system is designed to eliminate unwanted play by ensuring positive connection points by employing sealed ball bearings for very long life. Exact Align Pro parallel arms are meant to be the last set of parallel arms you will ever buy. Made in the USA. Pack of 1
$165.81
18485046
Special bearing used with Exact Align Pro parallel arm kits on John Deere and Kinze Planters. Pack of 1
$12.43
19912466
Hardware pack for lower parallel arms on John Deere planters. Pack of 1
$24.84
35918014
Hardware pack for upper parallel arms on John Deere planters. Pack of 1
$28.27
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0025
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.
$26.00
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$76.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$8.00
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$27.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$31.45
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$33.00
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$35.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$26.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$34.00
LL0574
LED 2 x 5 LED light for the top front cab on the 55 & 60 series + 6000-7000-8000 series tractor. Flood beam.
$34.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$100.00
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$219.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$64.00