Search
You have no items in your shopping cart.
Unverferth or Rawson Zone Builder
11457912
20" 13 wave coulter, .197 thick to fit Rawson 6 bolt patterns. Cuts 1 1/4" wide. Made of Boron steel.Fits Unverferth Zone Builder, 110, 112, 120, 122, 130, 132. Pack of 1
$48.70
11455426
20" fluted coulter to fit Rawson coulter assemblies. This blade is .197" thick and has a center hole of 3.75". There are 6 bolt holes on a 5" bolt circle.Fits Unverferth Zone Builder, 110, 112, 120, 122, 130, 132. Pack of 1
$51.84
11461305
24" smooth coulter, .236" thick to fit Unverferth Zone Builder 132 that use 24" coulters. Pack of 1
$95.95
11455431
Conservation Ripper point to fit the Zone Builder II, model 112, 122, 132. With 7" wings and crown on top of the point. Pack of 1
$308.84
11451764
Booted point with full chrome cap to fit Unverferth/Rawson Zone Builder. Has slot for shank guard. Pack of 1
$54.17
11449249
Crowned point for Unverferth Zone builders. Fits Unverferth Zone Builder® 110, 120, 130. Pack of 1
$39.42
11462004
Conservation Ripper point to fit Unverferth Strip-till machine. 2.5" wide for 3/4" shank. Pack of 1
$233.43
11461508
Conservation Ripper point to fit the Zone Builder. 7" wings with crown on top of the point. Pack of 1
$243.76
11446193
Conservation Ripper point to fit the Zone Builder, 2-1/2 wide with crown on top of the point. Pack of 1
$252.26
11449640
Reversible shin guard (shank protector) to fit Zone Builder 2012 and newer. Pack of 1
$105.02
11450847
Conservation Ripper point to fit the Zone Builder II, model 112, 122, 132, built 2012 and later, 2-1/2 wide with crown on top of the point. Pack of 1
$277.86
11447470
Shin, replaces Unverferth mild steel shin. Fits Unverferth Zone Builder® 110, 120, 130. Pack of 1
$55.83
11441066
Spiral Roll pin. Sold by the piece.Used with Unverferth Zone-Builder® and other Ripper points. Pack of 1
$2.67
11450073
Side plates for Zone Builder, price includes bolts. Includes one RH and one LH plate. Fits Unverferth Zone Builder® 110, 112, 120, 122, 130, 132. Pack of 1
$70.20
11443094
Spiral Roll pin. Sold by the piece.Used with Unverferth and other Ripper points. Pack of 1
$1.62
11447468
Spiral Roll pin. Sold by the piece.Used with Unverferth and other Ripper points. Pack of 1
$3.19
19312877
Wing set, include right and left wings with hardware. Used on models 110, 112, 120, 122, 130, 132. Pack of 1
$68.59
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$5.95
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$79.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$26.00
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$36.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$27.45
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$33.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.50
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$37.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$99.90
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$259.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$69.50
