Search
You have no items in your shopping cart.
Misc
11453620
Hex Cone locknut class 10 MED.Carbon Zinc.Used on John Deere Planters for parallel arms. MaxEmerge®2, Plus, Pro, XP, XP Pro, MaxEmerge5, ExactEmerge; John Deere drills 1530, 1535. Pack of 1
$1.17
11458109
Hex cap screw, grade 10.9, coarse thread, Zinc.Used on John Deere planter row units. Use with P48515 bushing. 6 used per row on MaxEmerge®2, Plus, XP, Pro, XP Pro; John Deere drills 1530, 1535.7 used per row on MaxEmerge5, ExactEmerge. Pack of 1
$1.51
11455138
Hex cap screw, grade 10.9, coarse thread, Zinc.Used on John Deere planter parallel arms. Use with P49465 and P78121 bushings. 2 used per row MaxEmerge®2, Plus, Pro, XP, XP Pro, MaxEmerge5, ExactEmerge. Pack of 1
$1.77
11456238
Upper parallel arm, standard length (15-3/4" overall) with bearings in place of bushings at the pivot points.Fits John Deere planter row units MaxEmerge®2, Plus, XP, Pro, XP Pro, MaxEmerge 5, ExactEmerge. John Deere drills 1530, 1535. Pack of 1
$71.28
11456616
18" Notched Marker blade, 4 mm thick. 5 bolt holes, on a 4.488" bolt circle. Center hole is 2.559".Used on John Deere planters 7200, 7240, 7300, 7340 1995 and after; 750 drills prior to s/n 19184.The original equipment blade is 3 mm thick, ours is 4 mm thick for longer wear and greater strength. Made by Bellota in Spain, the same supplier as the OEM blade. Pack of 1
$43.22
11451844
Bearing for clutch actuator shaft. 9/16" hex bore. Fits 7000 flex fold, 7200 & 1750. Pack of 1
$13.95
11452023
Bearing assembly for seed drive line, 7/8" hex bore. Fits 7200 flex fold, 1710, 1760, 1770, 1780, & 1790. Pack of 1
$18.26
11449260
Bearing with Labyrinth seal.; 40 mm OD. Case-IH: gauge wheel on 1200 series s/n CBJ0001611 & up; SDX30, SDX40 air seeders; 500, 500T Precision Disk Drills.John Deere: Fits all gauge wheel on XP, XP Pro; 1530, 1535 with XP. Fits rubbber closing wheel on MaxEmerge®Plus, Pro, XP, XP Pro; 1530, 1535. Fits cast closing wheel arm on grain drills 1560, 1565, 1590, 1690, 1835, 1860, 1895, 1990. 4 bolt notched marker blades used on 1700 and DB series planters; 7200, 7240, 7300, 7340 built 1995 and after. Drills 750, 1520, 1530, 1535, 1560, 1565, 1590. Gauge wheel and cast sealing wheel on 2510H applicator.Kinze: Gauge wheel, closing wheel bearing.Great Plains: 2" x 13", 3" x 13" press wheels 1997 and after with steel wheel halves.2.5" x 16, 3" x 16, 4.5" x 16" gauge wheels on planters and 10H, 15, 25 series drills 1998 & after with 15" openers.Hiniker: Fits gauge wheel on late 4200 air seeders.Martin: Spading-Closing Wheels on late 1700 with MaxEmerge®Plus, XP; John Deere 7000-7100; Kinze®; White 6000, 8000.Monosem Plus: gauge wheel on late models and closing wheels.New Holland: SP280, SP380, SP480, SP580 all s/n PNL001065 & up; P2080, P2085 Disk Drills.White: gauge wheel on 8000, 9000 series. Late 6000; 8000, 9000 rubber or cast dual closing wheels.CrustBuster, Krause, Landoll, Sunflower, Sukup: Fits grain drill gauge wheels. Pack of 1
$13.50
11443093
Bearing for guage wheel assembly; 40 mm OD. Case-IH: gauge wheel on 1200 series s/n CBJ0001611 & up; SDX30, SDX40 air seeders; 500, 500T Precision Disk Drills.John Deere: Fits all gauge wheel on XP, XP Pro; 1530, 1535 with XP. Fits rubbber closing wheel on MaxEmerge®Plus, Pro, XP, XP Pro; 1530, 1535. Fits cast closing wheel arm on grain drills 1560, 1565, 1590, 1690, 1835, 1860, 1895, 1990. 4 bolt notched marker blades used on 1700 and DB series planters; 7200, 7240, 7300, 7340 built 1995 and after.Drills 750, 1520, 1530, 1535, 1560, 1565, 1590. Gauge wheel and cast sealing wheel on 2510H applicator.Kinze: Gauge wheel, closing wheel bearing.Great Plains: 2" x 13", 3" x 13" press wheels 1997 and after with steel wheel halves.2.5" x 16, 3" x 16, 4.5" x 16" gauge wheels on planters and 10H, 15, 25 series drills 1998 & after with 15" openers.Hiniker: Fits gauge wheel on late 4200 air seeders.Martin: Spading-Closing Wheels on late 1700 with MaxEmerge®Plus, XP; John Deere 7000-7100; Kinze®; White 6000, 8000.Monosem Plus: gauge wheel on late models and closing wheels.New Holland: SP280, SP380, SP480, SP580 all s/n PNL001065 & up; P2080, P2085 Disk Drills.White: gauge wheel on 8000, 9000 series. Late 6000; 8000, 9000 rubber or cast dual closing wheels.CrustBuster, Krause, Landoll, Sunflower, Sukup: Fits grain drill gauge wheels. Pack of 1
$9.77
11450450
Bushing, 13/16" wide. Fits John Deere planter row units. One used per row on lower rear on MaxEmerge®2, Plus, Pro, XP, XP Pro, ME5, EE; 1530, 1535 drills. Pack of 1
$3.22
11455530
Bushing, 21/32" wide for parallel arms on MaxEmerge2, Plus, Pro, XP, XP Pro, ME5, EE; 1530, 1535 drills. 1 per row (on lower rear). Pack of 1
$2.59
11438152
Chamber door for vac meter, use with snap-in knockout wheel or scraper. For John Deere ME5; also MaxEmerge®2, Plus, Pro, XP, XP Pro when used with snap-in knockout wheel or scraper. Pack of 1
$19.92
11449772
Retaining pin. For use with C48393 flex coupler on John Deere MaxEmerge®2, MaxEmerge®Plus, and XP series planters. Pack of 1
$0.68
11443199
Closing wheel arm (cast). Fits John Deere MaxEmerge®Plus, Pro-Series, MaxEmergeXP, Pro-SeriesXP, MaxEmerge5, ExactEmerge planters; 1530, 1535 drills. Pack of 1
$34.32
11450067
Corn meter housing cover for finger pickup mechanism on John Deere 7000-7100 planters with MaxEmerge row units and early Kinze. Does not fit MaxEmerge® 2 and newer or Kinze 3000,4000 series corn meter. Pack of 1
$16.49
11420777
Covering disc assembly. 8" blade with bearing and 5/8" threaded stud.For John Deere planter disc cover closing wheel attachment. Pack of 1
$33.45
11459413
The cupped seed belt is used on John Deere and Kinze finger pickup meters. The cup shapped design of the belt helps position the seed to drop in the center of the seed tube to help reduce skips and doubles in the field. Pack of 1
$10.71
11447272
Depth adjustment cover. Fits John Deere MaxEmerge®2, MaxEmerge®Plus, Pro-Series™ planters; 1530, 1535 drills. Pack of 1
$16.00
11452037
Depth control handle, spring, snap ring.Fits John Deere planters MaxEmerge®2, MaxEmerge®Plus, Pro-Series, MaxEmergeXP, Pro-SeriesXP; 1530, 1535 drills. Pack of 1
$22.90
11457422
Down pressure handle, for heavy duty down pressure attachment. Used on John Deere MaxEmerge®2, MaxEmerge®Plus, Pro-Series™, MaxEmerge™XP, Pro-Series™XP, MaxEmerge™5 planters; 1530, 1535 drills. Pack of 1
$12.92
11432401
Replacement dust cap only for double disc feritilizer openers. Made of metal. Pack of 1
$2.00
11448056
Flex coupler with meter lockout. Fits John Deere MaxEmerge®2, MaxEmerge®Plus, XP. Pack of 1
$26.96
11460317
Heavy Duty Down Force, With Short Arms For John Deere MaxeMerge XP Planting Unit. 1 used Per Row. Pack of 1
$180.33
11457222
Compression spring for heavy duty down pressure attachment on John Deere MaxEmerge®2, Plus, Pro, XP, XP Pro, MaxEmerge5.Also used on John Deere cultivator models 960; 1050 s/n 1851 and up; 1060; John Deere 724 mulch finisher; John Deere 875 row crop cultivator. Pack of 1
$16.93
11452752
Idler arm for seed drive chain tightener on vacuum and finger pickup units. Fits 7000-7200 prior to 1992 & 1700 series. Pack of 1
$6.31
11424898
Idler arm spring for Herbicide/Insecticide drive. Used on MaxEmerge2 and MaxEmerge Plus. Replaces JD no. A49644. Pack of 1
$2.20
11445387
Hopper drive kit for use with finger pickup or Precision vSet meters. Fits John Deere planters with MaxEmerge®2, MaxEmerge®Plus, XP, XP Pro and MaxEmerge5 row units.Includes No. 41 chain, 7/8" hex bore sprocket bearing, drive sprocket with bracket, flex coupler, plastic idler with spring and hardware. Pack of 1
$107.12
11450663
Hopper drive kit for use with vacuum meters. Fits John Deere planters with MaxEmerge®2, MaxEmerge®Plus, XP row units.Includes No. 41 chain, 7/8" hex bore sprocket bearing, drive sprocket with bracket, flex coupler, plastic idler with spring and hardware. Pack of 1
$125.98
11459520
Seed meter chain idler kit. Fits John Deere 7200, 7300 and 1700 planters. Replaces round or sprocket type idlers. Prevents chain from derailing in high residue conditions. Includes idler, tension spring and bushing. Pack of 1
$9.39
11454132
Idler Sprocket for seed transmission on John Deere planters 7200, 7300 and 1700 series; dry fertilizer transmission on 7200, 7240, 1750, 1770, 1780, 7000 Flex-Fold.Bore size: 1/2". Pack of 1
$15.95
11986005
Idler sprocket for 50 chain. For use on seed transmission, also drive wheels on John Deere planters 7200, 7300, 7340, 1700, 1705, 1710, 1715, 1720, 1725, 1730, 1735, 1750, 1755, 1770, 1770NT, 1775NT, 1790, 1795, DB series. Replaces JD no. AA32776. Pack of 1
$22.45
11442291
Idler arm spring. Used for seed drive on John Deere MaxEmerge; MaxEmerge®2, MaxEmerge®Plus vacuum and finger pickup.also seed drive on Kinze® (except push units) planters.** Made in the USA. Pack of 1
$2.00
11447767
Idler update kit used on all Max Emerge series planters. Replaces JD kit no. AA43277. Pack of 1
$29.84
11965795
Knockout wheel, snap-in, for corn. For vacuum meter on John Deere planter MaxEmerge™5; also MaxEmerge®2, MaxEmerge®Plus, Pro-Series™, MaxEmerge™XP, Pro-Series™XP with John Deere A94259 chamber door. Replaces JD no. AA81736. Pack of 1
$12.48
11347567
Knockout wheel, bolt-on, for corn.For vacuum meter on John Deere planters MaxEmerge®2, MaxEmerge®Plus, Pro-Series, MaxEmergeXP, Pro-SeriesXP. Pack of 1
$11.50
11452942
Seed tube guard, use on MaxEmerge and Kinze (except 3000). Replaces JD no. A61577 and Kinze GB0241. Pack of 1
$7.72
11983309
Lower parallel arm assembly, extended length (23” overall). Fits John Deere planter row units MaxEmerge®2, Plus, XP, Pro, XP Pro, MaxEmerge 5, ExactEmerge. John Deere drills 1530, 1535. Replaces JD no. A65304 and A84382. Pack of 1
$185.12
11459417
Lower parallel arm, standard length (15-3/4" overall). Fits John Deere planter row units MaxEmerge®2, Plus, XP, Pro, XP Pro, MaxEmerge 5, ExactEmerge. John Deere drills 1530, 1535. Pack of 1
$109.24
11444585
Replacement blade only for CFC/Acra Plant notched marker assembly. Pack of 1
$31.94
11456228
16" notched marker disc with 4 bolt pattern (2.598" bolt circle). Used on John Deere planters: 1700, 1705, 1710, Â 1715, 1720, 1725, 1730, 1735, 1750, 1755, 1760, 1760NT, 1765, 1765NT, 1770, 1770NT, 1775, 1775NT, 1780, 1785, 1795; DB series. Optional on 7200, 7240, 7300, 7340 built 19955 and after.Used on John Deere drills: 750 s/n 19185 and up; 1520, 1530, 1535, 1560, 1590. Pack of 1
$35.53
11457925
Pivot bolt for walking gauge wheel. Use with P772K rocker.Fits John Deere planter row units MaxEmerge®Plus, Pro, XP, XP Pro, MaxEmerge 5. Also late John Deere MaxEmerge®2 planters with rocker marked A62609. John Deere drills 1530, 1535.Will not fit early MaxEmerge®2 with 9/16" hole and no pivot stops or row units equipped with John Deere pneumatic downforce sensors. Pack of 1
$3.03
11440683
Seed tube guard. Fits John Deere MaxEmerge™ , MaxEmerge® 2, MaxEmerge® Plus, Pro (except XP, XP Pro) and Kinze® (except 3000, 4000 series). Now with seed tube bracket to hold the seed tube in position. Pack of 1
$5.80
11454045
Bushing, 9/16" wide for front and rear upper parallel arms & front lower parallel arms on MaxEmerge2, Plus, XP, Pro, XP Pro, ME5, EE; 1530, 1535 drills.. 6 used per row. Pack of 1
$2.15
11452941
Plastic idler for seed meter drive, 1-9/16" diameter. Fits John Deere MaxEmerge™; MaxEmerge® 2 prior to 1992. (small idler). Pack of 1
$1.43
11439691
Rotating scraper with nylon cover. Fits John Deere planter row units MaxEmerge® 2, MaxEmerge® Plus, Pro, XP, XP Pro. (Does Not include the scraper Arm). Pack of 1
$4.94
11455830
Plate for mounting row unit, 13-7/16" wide (confirm AA40934 before ordering). Used on Max Emerge 2, Plus, Pro, XP, XP Pro, ME5, EE; 1530, 1535, 1700, 1705, 1710, 1715, 1720, 1725, 1725NT, 1730, 1735, 1745, 1750, 1755, 1760, 1760NT, 1765, 1765NT, 1770, 1770NT, 1775, 1775NT, 1780, 1785, 1790, 1795, 7200, 7240, 7300, 7340, DB series, DR series . Pack of 1
$104.91
11978625
Scraper, snap-in. For vacuum meter on John Deere planters MaxEmerge™5; also MaxEmerge®2, MaxEmerge®Plus, Pro-Series™, MaxEmerge™XP, Pro-Series™XP with John Deere A94259 chamber door. Replaces JD no. AA79993. Pack of 1
$7.98
11456232
Seed belt drive wheel for John Deere finger pickup mechanism. Pack of 1
$7.48
11442892
Seed tube protector for MaxEmerge XP, XP Pro, MaxEmerge 5. Pack of 1
$12.52
11454527
Seed tube guard for John Deere High Speed planters. This guard is made from a special alloy for longer wear than the original OEM guard. Pack of 1
$92.92
11449856
Seed tube without sensor. Has hole for high rate sensor. Pack of 1
$6.99
11456927
Seed tube without sensor. Has standard hole for sensor. Used on JD 7200 and some 1700. Pack of 1
$6.99
11452756
John Deere Seed Tube Kit. Includes seal and 2 tie bands. Fits John Deere 7300, 1700 Series, 1530, 1535, XP, XP-Pro. One sensor hole 3/4". Pack of 1
$9.67
11445693
Standard down pressure spring, bolts to side of parallel arms. Two or four used per row. Used on John Deere planter row units MaxEmerge®2, Plus, Pro, XP Pro, MaxEmerge5. John Deere drills 1530, 1535. Also fits 1700 series planter transmission contact wheel, 2 used. Pack of 1
$8.95
11444792
Sprocket and Bearing with 19 tooth sprocket, 7/8" hex bore, 2-1/2" width. Used on John Deere 7200, 7300 and 1700 series planters row unit and planter drive line.** Please verify width prior to ordering **Made in the USA. Pack of 1
$28.52
11461113
Bearing with 19 tooth sprocket, 7/8" hex bore, 2-1/8" width. Used on 7200-7300 and 1700 series planters row unit and planter drive line. Pack of 1
$21.84
11432384
Sprocket and Bearing with 19 tooth sprocket, 7/8" hex bore, 1-1/2" width. Used on John Deere 7200, 7300 and 1700 series planters row unit and planter drive line.**Verify width before ordering.**. Pack of 1
$24.46
11449771
Sprocket assembly, 13-19 tooth cluster with bearings for John Deere MaxEmerge®2, MaxEmerge®Plus, XP planter row units. Used on hopper and insecticide drive, finger pickup units only. Pack of 1
$38.45
11444690
Upper parallel arm, standard length (15-3/4" overall). Fits John Deere planter row units MaxEmerge®2, Plus, XP, Pro, XP Pro, MaxEmerge 5, ExactEmerge. John Deere drills 1530, 1535. Pack of 1
$30.42
11442897
Gauge wheel walking depth control. Allows gauge wheels to operate independently. Comes with pivot, rocker, and pivot bolt.Fits John Deere planter row units XP, XP Pro, MaxEmerge 5. John Deere drills 1530, 1535 with XP. Pack of 1
$42.43
11451868
Yoke for heavy down pressure spring assembly. Fits John Deere planters with MaxEmerge®2, Plus, Pro, XP, XP Pro, MaxEmerge5 row units. John Deere drills model 1530, 1535. Pack of 1
$65.20
11447791
Tungsten seed opener scrapers for John Deere planter row units MaxEmerge®2, MaxEmerge®Plus, Pro, XP, XP Pro, MaxEmerge 5. John Deere drills 1530, 1535.Mount directly on old scraper arms. Pack of 1
$29.90
11446089
Upper parallel arm, extended length (23" overall). Fits John Deere planter row units MaxEmerge®2, Plus, XP, Pro, XP Pro, MaxEmerge 5, ExactEmerge. John Deere drills 1530, 1535. 2 used per row. Pack of 1
$39.62
11455515
Lower shank, includes blade spindles. Used on MaxEmerge™XP row units. Pack of 1
$215.01
12427039
Hopper drive kit for use with finger pickup or Precision vSet meters. Fits John Deere planters with MaxEmerge®2, MaxEmerge®Plus, XP, XP Pro and MaxEmerge5 row units.Includes No. 41 chain, 7/8" hex bore sprocket bearing, drive sprocket with bracket, flex coupler, plastic idler with spring and hardware. Pack of 1
$114.03
19175360
This cast bracket attaches to planter toolbar/ frame with U-bolts. Parallel arms attach to outside of this narrow mounting bracket. Used with MaxEmerge 2, MaxEmerge XP, XP Pro, MaxEmerge 5e, Exact Emerge row-units on various planter models where narrow mounting is desired or required. Some planter models use this narrow bracket on all rows while other (typically older) models use it only where necessary for mounting clearance. Pack of 1
$165.81
19619858
Cartridge/guard for John Deere High Speed planters. This guard utilizes a high quality tungsten for better wear. Cartridge/guard for John Deere High Speed planters. This guard utilizes a high quality tungsten for better wear. Pack of 1
$88.50
19614980
Pivot bushing to fit poly seed hoppers on John Deere planter MaxEmerge®2, Plus, XP. Pack of 1
$8.14
19191075
Unit shank kit for John Deere. Includes C62767 cast shank, C83257 head frame and 3 flangehead bolts. Pack of 1
$342.49
12367945
Scraper Kit. One piece outside seed opener scraper kit. Fits John Deere MaxEmerge®2, MaxEmerge®Plus, Pro, XP, XP, Pro, MaxEmerge 5. 1530, 1535 drills. Includes (2) scrapers and (1) spring. Pack of 1
$18.87
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0025
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.
$26.00
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$76.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$8.00
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$27.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$31.45
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$33.00
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$35.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$26.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$76.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$33.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$34.00
LL0574
LED 2 x 5 LED light for the top front cab on the 55 & 60 series + 6000-7000-8000 series tractor. Flood beam.
$34.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$100.00
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$219.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$64.00