Larsen Lights provide a full range of led lights/led headlights for your Tractors, Combine, Harvesters, Harvest Equipment, Planting Equipment, Tillage Equipment, Hay and Forage Equipment, Chemical Applicators, Ag Trailers. We also have products for John Deere, AGCO, Case IH, New Holland Equipment, and more.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
"Solid" Mount Bracket LED-LED-760/765, for high vibration and JD 20/30 series tractors and 60/70 /"S" series combines, and many others using a 1 3/8" "U" clamp.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
Combo beam / Hi-Lo (most distance) light for Gleaner Rx2 series of combines. R42/52/62/72 early models and lower cab lights on all C / Rx2 using the 1.5" ball mount system. Please verify the serial number below.
LED-2398 Flood beam light for Gleaner Rx2 series of combines. R42/52/62/72 early models and lower cab lights on all C / Rx2 using the 1.5" ball mount system. Please verify the serial number below.
Headlight for some Agco tractors using 3 bolts to hold the light. Spacing between the 2 mounting holes is 5". Please verify your tractor use the 3 hole system before ordering.
An oval LED-6060 Hi-Lo LED light for CaseIH combines and some JD tractors. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600. The light is made especially for use on the CIH combines, but can be used on some JD tractors.
An oval LED-6060 Hi-Lo LED light for CaseIH combines and some JD tractors. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600. The light is made especially for use on the CIH combines, but can be used on some JD tractors.
An oval LED-652 Hi-Lo LED light for some JD tractors and CaseIH combines. Fits in the hood on many newer JD tractors and some newer CIH combines. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600.
LED Hood Conversion Kit for JD 4650 and 4850. Removes the old lights in the nosecone and replaces them with 4 x 20 watt LED lights. For JD 4650 & JD 4850
Kit comes with Led lights, wire harness(plug and play), housing, billet bezel, and all mounting hardware. Everything needed to convert your John Deere Tractor to LED Lighting.
Note: This product will only work with tractors with existing front headlight/light bar in the hood. If it's recessed in the hood you need the TL3000 instead.
Replaces John Deere Part Number: AL64781
Kit comes with Led lights, wire harness(plug and play), housing, billet bezel and all mounting hardware.Everything needed to convert your John Deere Tractor to LED Lighting. Tiger lights brand. For John Deere, 1640, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355N, 2550, 2855N, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 4030, 4040, 4230,
Set of right and left headlight for CIH tractors, & Sprayers. This light has "centering bushings" that will center the lamp in the bezel. Please compare to your model before ordering.
An LED replacement light for JD combines with the rectangular row finder light that is mounted in the grain tank, right and left side. The price is for one light. It comes with a steel frame that bolts onto the light to make the light seal better when installed in place of the OEM light.
LED-486, Round stud mounted warning light for mounting onto fenders and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash. Also - most older flash relays will not work with this low wattage turn signal, you will need SKU LL0466 for the turn signal to work.
LED-486, Round stud mounted warning light for mounting onto fenders and many other places where you need an amber / red warning light. 8.5 watt. Note- This light does not have a built-in flasher, they would require a flasher relay in order to flash.
LED-458 JD Skid Steer Light. Replaces OEM Part Numbers: AT352538. Read fitment notes as the light is too deep for the front-facing lights on some JD skid steers.
The LED-4017 Skid Steer light. Fits into OEM housing. Replaces OEM Part Numbers: Bobcat: 6661353, JD: MG86533428, New Holland: 9829523. Please compare to your machine as some models use the LED-4010, also used as the front lights. Sold as QTY 1.
The LED-827 flood is an oval 27 watt 2100 lumen flood light that works well on smaller tractors and on combines for stubble, discharge, and auger light. Comes with an H11 / 880 series connector, this is the connector commonly used on this size light, and is the same connector as used on a 885 or 886 bulb. (880 series bulbs)
LED-4405 40° is a Round / slightly oval work light made to fit many JD tractors, sprayers and combines. It can be mounted anywhere you need a round light.
LED-4405 is a Round / slightly oval work light made to fit many JD tractors, sprayers and combines, and some Lexion combines. It can be mounted anywhere you need a round floodlight.
Plug & Play flush mount LED Light. Works with later model Case/IH Combines Common cab models with 8 lights on top of the cab. Direct replacement. Aluminum housing, Durable Poly-carbonate Lens. Replaces Part Numbers: Case/IH: 47430979, 47430977. You will need adapter wire LL0496 found here (4 in a bag) https://www.larsenlights.com/9005-to-9005-reverse-polarity-adapter
Plug & Play flush mount LED Light. Works with later model Case/IH Combines Common cab models with 8 lights on top of the cab. Direct replacement. Aluminum housing, Durable Poly-carbonate Lens. Replaces Part Numbers: Case/IH: 47430979, 47430977. You will need adapter wire LL0496 found here (4 in a bag) https://www.larsenlights.com/9005-to-9005-reverse-polarity-adapter
Plug & Play flush mount LED Light. Works with later model Case/IH Combines Common cab models with 8 lights on top of the cab. Direct replacement. Aluminum housing, Durable Poly-carbonate Lens. Replaces Part Numbers: Case/IH: 47430979, 47430977. You will need adapter wire LL0496 found here (4 in a bag) https://www.larsenlights.com/9005-to-9005-reverse-polarity-adapter
If you replace your stock flashers with LED flashers, you might need a new flasher relay or a set of resistors in order for the flashers to flash normally.
If you replace your stock flashers with LED flashers, you might need a set of resistors or a LED flasher relay in order for the flashers to flash normally. If possible use the LED flasher relay instead of the resistors. Find it further down on this page.
LED-4013 Hi-Lo or as flood using the included adapter wire. Claas Combine Light. Will also fit some Massey Ferguson tractors with high visibility cabs and John Deere Forage Harvesters. Replaces OEM Part Numbers: AZ41570, 3713134M91
LED-4014 25° Distance light, Oval LED Flush Mount Cab Light. This light is a LED light for Challenger & Massey Ferguson tractors. Uses the original mounting bracket on the tractor. DT connectors included.
Replaces OEM Part Numbers: 3786665m93, 3786664m92.
LED-4014 Flood, Oval LED Flush Mount Cab Light. This light is a LED light for Challenger & Massey Ferguson tractors. Uses original mounting bracket on the tractor. DT connector included.
Replaces OEM Part Numbers: 3786665m93, 3786664m92. You might need adapter LL0451 for the Gleaner combines.
LED-9652 Hi-Lo, LED Oval Headlight fits into the hood of John Deere Tractors. Uses OEM Mount and Wiring, Plug and Play. Replaces John Deere Part Number: RE181963, RE181964, RE205360
LED-3630 Flood Skid Steer Headlight is a Plug & Play LED Light. Fits into original housing.
Replaces OEM Part Numbers:
Case & New Holland: 84306271, 84306268, 84306337
Note: This light fits New Holland Skid Steers with Heavy Duty Light Housing.
The Par-36 light as a combo of the red taillight and white work light. 3 spades on the rear for power connections. 12 volt. Bulb number: 4409X, 4409 Replaces:
AC: 250301, 235583
CASE: A40855
IH: 371461R92 & FITS LIGHT 377102R92
MM: 10p1729, 10p2646, 20-7000652
Oliver: 103593A, 166406A, 20-7000652
White: 10P2646
Expect better visibility and higher productivity with this rugged light. The lens optics place bright white light where it is needed. Recommended for off-road applications.Includes: (2) HA84306268
LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.
LED-9301L, Left side LED Corner Grill Lights, fits into the hood of 7600-7810 John Deere Tractors, and 4700, 4710, & 4720 Sprayers. Replaces OEM Part Number: RE151564 (Left)
LED-9301R, Right side LED Corner Grill Lights, fits into the hood of 7600-7810 John Deere Tractors, and 4700, 4710, & 4720 Sprayers. Replaces OEM Part Number: RE151565 (Right)
LED-2417 amber with a built-in resistor. No need for special LED flasher relays! This model fits some CIH models - replaces OEM # 84269970, 84273385, 84273384
LED-2206 w/ built in resistor. Used on CaseIh, IH, FNH, Versatile/Buhler and more. Replaces OEM Part Numbers: 92185C1, 216044C91, 216044C92, 92260C1, 130882C91, 107324C91, V93104, V77050, 9706415, 86014019, 86023276, 86016518, 86012669, 87053368, 83977683, & 8770630.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.