Search
You have no items in your shopping cart.
Water Pumps
FDH513B
Mounts w/ 5/16" & 3/8" bolts.
Includes: Mounting & Block Gasket
$143.86
FEA513FN
Mounts w/ 5/16", 3/8" & 7/16" bolts. Includes: Mounting & Block Gasket
Use ##F87800115## for Water Pump w/ Back Housing
$60.13
A77704 NEW
The three main causes of failure on cooling systems are chemical electrolysis, stray voltage electrolysis & erosion corrosion. These causes will NOT affect the material of the impeller.
Includes: Mounting O-Ring
$83.29
R545572
The three main causes of failure on cooling systems are chemical electrolysis, stray voltage electrolysis & erosion corrosion. These causes will NOT affect the material of the impeller.
Includes: Mounting Gasket
$242.36
601816-656N
Has water ports for gas models w/ pressed on pulley.
Includes: Mounting & Backplate Gasket
$166.77
K15341-73030
Pulley has offset fan mounting holes.
Includes: Mounting Gasket
$144.84
W3835253N
Includes: Mounting Gasket
Casting #380027D has 2 impeller sizes, W3835253N is 6.75, Double check before ordering for Misc. Machines.
$233.46
HA2854835
The three main causes of failure on cooling systems are chemical electrolysis, stray voltage electrolysis & erosion corrosion. These causes will NOT affect the material of the impeller.
Includes: O-Rings
$95.62
HA5801848196
The three main causes of failure on cooling systems are chemical electrolysis, stray voltage electrolysis & erosion corrosion. These causes will NOT affect the material of the impeller.
Includes: O-Rings
$115.66
FEA513GN
Mounts w/ 5/16" & 3/8" bolts.
Includes: Mounting & Block Gasket
$114.11
M742558 NEW
Fan pilot diameter of 1.060".
Includes: Mounting Gasket
$80.18
AJ804927
The three main causes of failure on cooling systems are chemical electrolysis, stray voltage electrolysis & erosion corrosion. These causes will NOT affect the material of the impeller.
Includes: Mounting O-Ring
$122.65
R5318N
This Water Pump is designed for units w/ a by-pass cooling system. If the machine is not equipped w/ by-pass, OE plug is required.
Includes: Mounting Gasket
$185.26
353729N
Break in procedure required. Please read instructions before installation.
Includes: Mounting Gasket
$222.82
AK201750
Some castings have a thermostat hole that is bored deeper. Use OE# K262945 (1/2" Rubber Grommet) on these castings.
Includes: Mounting Gasket
$104.87
HFE7NN8501CC
Mounts w/ 5/16" & 7/16" bolts.
Includes: Mounting & Block Gasket
$137.46
HCD9003714NWP
5/8" threaded shaft, 18 threads per inch.
Includes: Mounting Gasket
$90.52
FDH513AN
Includes one-groove pulley, 2-5/8" tall, 4-1/2" diameter. Includes gasket and impeller.
$125.18
R4280
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$139.41
353729
Easy installation with no break in period! With our new design, grease is not required. Contains updated seal & bearing.
Includes: Mounting Gasket
$257.58
WMK0307
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$167.00
M837081046
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
This is a 2 bearing pump
$424.00
R12712
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$141.86
D836859330
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$760.97
R2885
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$138.45
R3407
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$122.99
R2244
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$104.87
R2886
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$163.07
R4279
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$144.24
R1052
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$113.09
M747616
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Mounting Gasket
$186.70
F87800115
Water Pump w/ Pulley - New Includes: Back Housing, Mounting & Block Gasket
Use ##FEA513FN## for Water Pump w/o Back Housing
$115.28
F81876233
Mounts w/ 5/16" & 7/16" bolts. Includes: Back Housing, Mounting & Block Gasket
Use ##FEA513EN## for Water Pump w/o Back Housing
$122.65
F87800714N
Pump w/ 3.660” Diameter Impeller
Includes: Mounting Gasket
$149.83
F87800712N
Pump w/ 4.400” Diameter Impeller
Includes: Mounting Gasket
$149.83
M747611AN
w/ Double Thermostat, 3/4" diameter shaft.
Includes: Mounting Gasket
$220.20
M747611CN
15/16" diameter shaft.
Includes: Mounting Gasket
$163.60
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$5.95
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$79.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$26.00
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$36.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$27.45
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$33.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.50
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$37.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$99.90
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$259.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$69.50
