Ideal for tough environments (i.e. heavy PTO work). Handles an additional 500 lbs of force. For a heavy duty Roller Bearing use HH70227. This bearing is splash lubricated. Make sure sump has an adequate level of oil.The 83034317 IPTO Ball Bearing, w/ 17 Balls fits equipment brands such as: International
Includes: Includes Control Valve Guide Stem, Control Valve Dowel Pin, and Control Valve Guide.For Single or Dual PTO, w/ Mechanical Brakes Only.The 8302271 IPTO Control Valve Assembly fits equipment brands such as: International
Included in 8302254 IPTO 540/1000 RPM Output Shaft Bearing KitThe HHST293 IPTO Output Shaft Bearing fits equipment brands such as: Case IH, International
Included in 8302254 IPTO 540/1000 RPM Output Shaft Bearing KitThe HH381483 IPTO Output Shaft Bearing fits equipment brands such as: Case IH, International
Positivelyidentify the dimension of the rear bearing surface before ordering. Measure from the bearing stop to the start of the snap ring groove (1.100").
Stops oil leaks on the 540 RPM PTO Output Shaft. Creates an external seal by slipping over the shaft & threading into PTO housing. Externally utilizes OEM inner seal. No disassembly required.The 830470 IPTO Seal Assembly fits equipment brands such as: International
Includes: (1) Oil Seal, (2) Seal RingsOil Seal is located inside the back of the PTO shaftThe M830449 PTO Input Shaft Seal Kit fits equipment brands such as: Massey Ferguson
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.